BX25DLB Loader Hydraulics

[Fireators]

I had my BX25 loader and BH off for a week while I changed Fluids, Filters and replace Tranny Fan. Went to attach loader back on yesterday and the bucket will not curl now to lift loader up into mounting bracket. I checked the back jumper line connections and triple checked all connections for loader. Did have to push center nub on 2 female connectors coming from loader to release pressure that built up from it sitting for 1week. The lift cylinders do move to line up to cradle in bracket and hose jerk like they under pressure when I try to curl bucket down to roll loader into brackets. I did power wash bottom of tractor & tranny to get built up dirt out of cooling fins. Anyone have more ideas of cause or other things to check out? Thanks

 

[Fireators]

I have got it fixed, as it was not broke. I took each connection apart for 4th time and sparyed females down with WD-40 and wiped away all oil and Q-tipped out the connectors of any discolored fluid. wiped down all male connectors and put all together again and tried hooking up loader again and this time there was no issue with operation.

 

[number two]

Welcome!
Thanks for reporting back so we won't wonder!