My 2006 c series keeps losing its rear wheels to front wheel relationship. I can straighten them out as you should to drive in two wheel steer, but when you try to use all wheel steer it starts crab walking after a couple of minutes. I noticed that there was a little oil leaking out of the rear steering shafts, enough to see it on the cylinder not on the ground. Could this be the problem and can you just replace the seals?
C series toolcat steering
- Thread starter Moto768
- Start date
- Views: 2439
SSdoxie
Elite Member
Yes a leak or oil seep at the cylinder can cause the cylinder to drift and get out of syn with the other axle like you described. There might be some other problem but fixing cylinder leak is place to start.
Cylinder is resealable.
Cylinder is resealable.
I finally put new seals in the rear steering cylinder. I still lose my steering relationship. I also noticed that my steering indicator light doesnt light up either, could be related problem. I would really appreciate your ideas
Here are some similar links:
- Article
- Type: Tractor
