spechols
Silver Member
I have a CADTrac 1500 - for sale in Port Matilda - $6,000
This is a 4x4 CADTrac articulated Ride On mini tractor loader with a 40 bucket. It is built from a kit and has a 28hp gas motor to run the pump.
It starts right up, operates just like it should - no smoke and runs well. Handy like a mini skidsteer but doesn't tear up your yard or driveway. Honda 28hp V-twin engine. Foot control hydrostatic drive. Joystick loader and steering controls. Very heavy steel construction. 500lb lift rating. I have enjoyed it but now have too many articulated 4x4 tractors and need to let this on go to make room for other projects. I am asking $6,000 - please don't bother me with low ball offers, this price is less than the cost to build.
For information please go to CADTrac 15 – CADplans
It was built a Virginia in 2017 for the challenge and some minor yard work, the builder completed both and move on to his next project. I am still in contact with him. The tech support line at the Surpluscenter is helpful as well because that is where most of the hydraulic parts where purchased. I have all the info for the parts and the plans. There is no hour-meter but I would easily guess it has less that 50 hours on it because I got another tractor a few months after I bought it in July 2018.
It comes with a 40 bucket and larger bucket that needs a little work to mount. I can also show you how to mount forks if you like.
These are videos of the actual CADTrac being used by the builder on the first day from a few years back. There is a learning curve to operating a CADTrac just like any equipment.
Cadtrac Homemade Articulating Loader Tractor 1
Cadtrac Homemade Articulating Loader Tractor 1 - YouTube
Cadtrac Homemade Articulating Loader Tractor 2
Cadtrac Homemade Articulating Loader Tractor 2 - YouTube
Cadtrac Homemade Articulating Loader Tractor 3
Cadtrac Homemade Articulating Loader Tractor 3 - YouTube
Cadtrac Homemade Articulating Loader Tractor 4
Cadtrac Homemade Articulating Loader Tractor 4 - YouTube
link to the build site
https://sites.google.com/site/johnboganfabrications/cadtrac
This is a 4x4 CADTrac articulated Ride On mini tractor loader with a 40 bucket. It is built from a kit and has a 28hp gas motor to run the pump.
It starts right up, operates just like it should - no smoke and runs well. Handy like a mini skidsteer but doesn't tear up your yard or driveway. Honda 28hp V-twin engine. Foot control hydrostatic drive. Joystick loader and steering controls. Very heavy steel construction. 500lb lift rating. I have enjoyed it but now have too many articulated 4x4 tractors and need to let this on go to make room for other projects. I am asking $6,000 - please don't bother me with low ball offers, this price is less than the cost to build.
For information please go to CADTrac 15 – CADplans
It was built a Virginia in 2017 for the challenge and some minor yard work, the builder completed both and move on to his next project. I am still in contact with him. The tech support line at the Surpluscenter is helpful as well because that is where most of the hydraulic parts where purchased. I have all the info for the parts and the plans. There is no hour-meter but I would easily guess it has less that 50 hours on it because I got another tractor a few months after I bought it in July 2018.
It comes with a 40 bucket and larger bucket that needs a little work to mount. I can also show you how to mount forks if you like.
These are videos of the actual CADTrac being used by the builder on the first day from a few years back. There is a learning curve to operating a CADTrac just like any equipment.
Cadtrac Homemade Articulating Loader Tractor 1
Cadtrac Homemade Articulating Loader Tractor 1 - YouTube
Cadtrac Homemade Articulating Loader Tractor 2
Cadtrac Homemade Articulating Loader Tractor 2 - YouTube
Cadtrac Homemade Articulating Loader Tractor 3
Cadtrac Homemade Articulating Loader Tractor 3 - YouTube
Cadtrac Homemade Articulating Loader Tractor 4
Cadtrac Homemade Articulating Loader Tractor 4 - YouTube
link to the build site
https://sites.google.com/site/johnboganfabrications/cadtrac
