Can I run my welder on 220 with my generator

   / Can I run my welder on 220 with my generator #31  
To get back on subject;

this link goes to the NEMA straight blade plugs and receptacles
looking at them you should be able to see how many people can become confused.
NEMA Plug Types - NEMA Straight Blade Reference Chart | Stay Online

and here is one for locking receptacles and cord end,
NEMA Receptacle Chart - NEMA Locking Reference Guide | Stay Online

When you look at the various configurations;
for 120-125 volt,
for 240-250 volt,
and especially for 125/250 volt in 3 or 4 pole configurations.
 
   / Can I run my welder on 220 with my generator #32  
A 5500 watt gen set is going to struggle with any of the transformer based sticks running anything over 90-to-100 amps. Probably perfect for the 140 amp class if mig/flux welders. Again will struggle with the the 200 to 215 amp mig/flux machines running at their upper levels.
 
   / Can I run my welder on 220 with my generator #33  
A power factor correction capaciitor would be a benefit but is more complicated that what it is worth for the layperson . Best to use a large enough generator instead of trying to make do .
 

Tractor & Equipment Auctions

2016 Chevrolet Tahoe SUV (A52377)
2016 Chevrolet...
2016 TAKEUCHI TL8 SKID STEER (A51242)
2016 TAKEUCHI TL8...
2010 John Deere TX Gator 4x4 Utility Cart (A52377)
2010 John Deere TX...
BANDIT ZT1844 RUBBER TRACK STUMP GRINDER (A50458)
BANDIT ZT1844...
UNUSED PE Industrial Stretch Wrap Rolls (A53117)
UNUSED PE...
2017 TROXEL 130 BBL STEEL VACUUM TRAILER (A53843)
2017 TROXEL 130...
 
Top