bumble bee
New member
I was wondering if there is a way to turn up the hydralic pressure on my 1026.The 260 hoe seems a little weak. 5 or 10% would probably help quite a bit.
can you turn up pressure on JD 1026r
- Thread starter bumble bee
- Start date
- Views: 12924
-
- Tags
- john deere 1026r
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Seems like your pressure setting is 2000 psi
A relief valve is what is set to protect the hyd system. It has a suggested manufacturer setting, but people have adjusted it to other settings.
Higher setting should help the hyd system produce more power for the implements. a 100 psi increase, will give a 2 in cyl,. 1 in shaft cyl
a 314 lbs of force X 2
It is recommend to set the relief pressure to about 50 to 100 psi below the pumps max pressure
Hydraulics:
Type: open center
Capacity: 3.25 gal [12.3 L]
Pressure: 2000 psi [137.9 bar]
Valves: 2 to 3
Total flow: 6.3 gpm [23
http://www.tractordata.com/farm-tractors/006/7/8/6789-john-deere-1026r.html
A relief valve is what is set to protect the hyd system. It has a suggested manufacturer setting, but people have adjusted it to other settings.
Higher setting should help the hyd system produce more power for the implements. a 100 psi increase, will give a 2 in cyl,. 1 in shaft cyl
a 314 lbs of force X 2
It is recommend to set the relief pressure to about 50 to 100 psi below the pumps max pressure
Hydraulics:
Type: open center
Capacity: 3.25 gal [12.3 L]
Pressure: 2000 psi [137.9 bar]
Valves: 2 to 3
Total flow: 6.3 gpm [23
http://www.tractordata.com/farm-tractors/006/7/8/6789-john-deere-1026r.html