Eddie
Platinum Member
Re: Can\'t get steering wheel off
Cheaper to get a brass hammer at Harbor Freight!
Cheaper to get a brass hammer at Harbor Freight!
Can't get steering wheel off
- Thread starter Pilot
- Start date
- Views: 4593
Eddie
Platinum Member
Re: Can\'t get steering wheel off
Cheaper to get a brass hammer at Harbor Freight!
Cheaper to get a brass hammer at Harbor Freight!
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Re: Can\'t get steering wheel off
I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25.
I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25.
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Re: Can\'t get steering wheel off
I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25.
I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25.
oliver28472
Veteran Member
Re: Can\'t get steering wheel off
That ought to work right now. It would make it a 2 man job. One needs to be pulling up on the wheel while the other hits it. (the shaft)
That ought to work right now. It would make it a 2 man job. One needs to be pulling up on the wheel while the other hits it. (the shaft)
oliver28472
Veteran Member
Re: Can\'t get steering wheel off
That ought to work right now. It would make it a 2 man job. One needs to be pulling up on the wheel while the other hits it. (the shaft)
That ought to work right now. It would make it a 2 man job. One needs to be pulling up on the wheel while the other hits it. (the shaft)
Eddie
Platinum Member
Re: Can\'t get steering wheel off
</font><font color="blue" class="small">( I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25. )</font>
If you leave the nut high enough just to hit it then it will crush down on the threads and end of the shaft. I have crushed the nut and damaged the end of the shaft using a regular hammer. A brass hammer will not crush the nut or damage the shaft. A dead blow hammer will work also. You do it however you want to, but I will always use a brass hammer after a problem I had one time.
</font><font color="blue" class="small">( I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25. )</font>
If you leave the nut high enough just to hit it then it will crush down on the threads and end of the shaft. I have crushed the nut and damaged the end of the shaft using a regular hammer. A brass hammer will not crush the nut or damage the shaft. A dead blow hammer will work also. You do it however you want to, but I will always use a brass hammer after a problem I had one time.
Eddie
Platinum Member
Re: Can\'t get steering wheel off
</font><font color="blue" class="small">( I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25. )</font>
If you leave the nut high enough just to hit it then it will crush down on the threads and end of the shaft. I have crushed the nut and damaged the end of the shaft using a regular hammer. A brass hammer will not crush the nut or damage the shaft. A dead blow hammer will work also. You do it however you want to, but I will always use a brass hammer after a problem I had one time.
</font><font color="blue" class="small">( I'm still confused about the brass hammer , Eddie. I'm going to hit the nut, not the shaft. If I bruise the nut, they're about $.25. )</font>
If you leave the nut high enough just to hit it then it will crush down on the threads and end of the shaft. I have crushed the nut and damaged the end of the shaft using a regular hammer. A brass hammer will not crush the nut or damage the shaft. A dead blow hammer will work also. You do it however you want to, but I will always use a brass hammer after a problem I had one time.
oliver28472
Veteran Member
Re: Can\'t get steering wheel off
I realize how the shaft is made, etc. I think a lot are made that way. We don't know how bad the rust is, if any. My suggestion to use penetrating oil and just drive it around is not going to get it off any time soon but it does work.
I realize how the shaft is made, etc. I think a lot are made that way. We don't know how bad the rust is, if any. My suggestion to use penetrating oil and just drive it around is not going to get it off any time soon but it does work.
oliver28472
Veteran Member
Re: Can\'t get steering wheel off
I realize how the shaft is made, etc. I think a lot are made that way. We don't know how bad the rust is, if any. My suggestion to use penetrating oil and just drive it around is not going to get it off any time soon but it does work.
I realize how the shaft is made, etc. I think a lot are made that way. We don't know how bad the rust is, if any. My suggestion to use penetrating oil and just drive it around is not going to get it off any time soon but it does work.
