Can't just retube that

[airbiscuit]

I don't think I've ever seen a bucket cylinder that has so much travel, and so little effect on the dump and curl functions.

 

[fatjay]

Possibly a Milton? Tractor Supply carries them, but you'll want to confirm thread/hole size:

https://www.tractorsupply.com/tsc/product/milton-universal-clamp-in-tubeless-tire-valve-stems-fits-453-in-and-5-8-in-rim-holes-2396365?srsltid=AfmBOopmcLfnWqDbiNgeq7y_8qOjyqGZ5uys45bs_A5r4Vusqk04RQXCW_g

I found these earlier, i think they may work.

https://www.amazon.com/TR618A-Industrial-Agricultural-Core-Suitable-Applications/dp/B0B8RZ57VY?th=1

 

[fatjay]

I don't think I've ever seen a bucket cylinder that has so much travel, and so little effect on the dump and curl functions.

I made it myself! It's extremely inefficient and I can't even dump with it.

 

[CH4Ohio]

I found these earlier, i think they may work.

https://www.amazon.com/TR618A-Industrial-Agricultural-Core-Suitable-Applications/dp/B0B8RZ57VY?th=1

That thing looked so rotten in the pic that I’d be afraid to put air in it. Seriously.

 

[jwmorris]

Photo of one my Father fixed.

And another he saved just incase.

 

[fatjay]

Photo of one my Father fixed.

View attachment 4330684

And another he saved just incase.

View attachment 4330683

Looks good. I'm afraid to take mine apart, that tire is so damned heavy.

 

[fatjay]

And she moves again.

 

[RayIN]

Well then...

Tires on, holding air. Went to pump up the rear and this is what I found.

It's supposed to look like this:

The stem threads into a piece. Where can I find the stem that threads in?

You can buy it at most any large tire store, or farm store.
A new rear tire tube valve stem: https://www.tractorsupply.com/tsc/product/milton-core-housing-valve-stem-115465