gates
Silver Member
- Joined
- Feb 15, 2005
- Messages
- 160
- Location
- Maryland
- Tractor
- JD 6410 Cab MFWD & FEL,JD 4610 MFWD & FEL,JD 4720 Cab MFWD & 400CX FEL ,Kub. RTV 900W,Hon. Rincon w/plow,Yam. Grizzly,Case 1845C,580L,580SE,Terex 636,Grasshopper 428D,Takeuchi TL 150,Brush Bandit 150
Heehaw,
Forgot about the posts that hold the brackets. They are
5" x 5" x 1/8" aluminum box tubing. They are in the ground 30", frost line for Md., and are concreted in place. The concept was to have everything look like the vinyl fence. It worked out very well, when you look out over the pasture you can not tell where the gates are.
Ron
Forgot about the posts that hold the brackets. They are
5" x 5" x 1/8" aluminum box tubing. They are in the ground 30", frost line for Md., and are concreted in place. The concept was to have everything look like the vinyl fence. It worked out very well, when you look out over the pasture you can not tell where the gates are.
Ron