Carry All

[theboman]

I got my boards on my carry all (finally). I used treated 2x6 and 2x4. I got some pics and hope to post soon (I'm gone all next week to a bluegrass festival).
FYI, while trimming the boards I figured it was the perfect time to buy me a saw zall.

 

[theboman]

Okay here's some pics of another handy dandy attachment.
1-3

 

[theboman]

Okay here's some pics of another handy dandy attachment.
2-3

 

[theboman]

Okay here's some pics of another handy dandy attachment.
3-3

 

[JFarms]

Nice Carry All ... and nice tractor. I have a small trailer, but I'm thinking the Carry All would be easier to use, since to can lower it almost to ground level. Makes me want to go get me a carry all too.

 

[theboman]

They are wonderful. I guess I have less than $130 in the carry all and a couple hours labor.
My brother has one and last spring he tacked up some side boards and I used my FEL to load it with limestone he uses go around the house.

 

[gws]

I have a carry all with a pallet on it.Works great. NIce way to take out the metal garbage cans from the shop

 

[AZMike]

Nice job with your carry all. I just had a forklift attachment made for my B7500 3 pt hitch. The forklift fits on a tool bar that also can take rippers and other attachments. So far my carry all consist of a sheet of plywood. I will submit pictures to the web sometime soon. I hope!!

 

[cchoate]

KK makes a pallet mover that I was thinking of adding some treated 2x6's and using as a carry all. The carry all KK makes seems a little light weight to me.

 

[Hoeman00]

I couldn't tell from the pics if i has holes in the top
so u can turn it over to use as a small lift.
Like picking apples or ?????
Some company made them before like that.

 

[theboman]

I'm not sure what you mean but you can stand on it with no problem.
It's a 3pt attachement so if you turn if over I'd have no ideal on how to hook it up since the top link would be on the bottom.

 

[Hoeman00]

The ones I saw had top link plates on top and bottom
w/ pin holes top and bottom so u could reverse it.
That would give u 4' or so more height.

 

[Anonymous Poster]

I've been wanting one of these for some time now and happened to pick up a carry-all at TSC this afternoon. It's a very versatile attachment and dirt-cheap, too.

Thanks for the pics!

 

[robertm]

theboman,
Good looking skins on that 7500! What are they called? R-? I have turfs on my 7500 and would rather ones like you've got. Can you tell me if you go them with the tractor? What are the fronts like? Do they tear up the grass? My front turfs really tear up the grass by leaving circles in the yard. I think ag tires would have done me better!

 

[diggerjim]

Hi I would appreciate some info on your toolbar, sounds like something I'm looking to build. I need occasional rippers, been thinking of modifing a chisel plow. Like the idea of a toolbar for several jobs.

IH B414, Yanmar 2220D, Not nearly enough attachments.

 

[cchoate]

The tires on Bowmans 7500 are "Bar Turfs". Cross between R-4's and turfs.

 

[theboman]

They are really nice tires but if it's damp they can/will take a hunk of turf. The tries came on the 'Bota and the dealer sells most this type of tires on this tractor. The dealer recommended the tires for my use but I had the option for turf, R-4 and I believe ag tires. I'm happy with them.

 

[theboman]

Huh?? You lost me totally on a tool bar question. Was the question directed at me and what's a tool bar?

 

[rlk]

Robertm, if your turfs are tearing up the grass, you might want to check the tire pressure. On my BX 2200, if the fronts are overinflated they will tear the grass. As long as the tire pressure is where it is supposed to be, I don't have a problem.

Bob

 

[theboman]

Started and nearly finished building side rails for my carry all.
Picked up some stake holders at TSC during my travels.
Maybe one day I'll post pics when I get it all together..kinda ran out of carriage bolts and daylight.