Carry-All

[DDT]

I bought a 3 point forks at a auction, They come in very handy at times.

 

[DDT]

I built a fame 5' x 4' with 3" channel iron for the rear forks to slide into.

 

[DDT]

It's time for a floor.

 

[DDT]

I used some plastic flooring from a old hog building. 2" thick x 5 1/2" wide. The slots in it alows snow and rain to melt and run though, so it won't rott.

 

[HR_Mutt]

Nicely done DDT! you could have a dance party on all that space. Notice there's plenty of light aimed back there also.

 

[DennisY]

You have almost a trailer there, I bet it's real handy. I need to do something like that myself perhaps with some sides. I had never heard of plastic flooring but it sounds like a good idea. How much weight have you put on it?

 

[Thomas]

DDT,
Nice job!!
Looks like you won't have a use for a trailer now,and a nice looking work platform. /w3tcompact/icons/wink.gif

Thomas..NH /w3tcompact/icons/wink.gif

 

[DDT]

I have had the forks for a year now. My old 855 would max out the 3 point at times and never bent the 2" sq. tubing. how ever my 4300 has double the lift cap. I will surely find out what it will hold in time. the carryer frame is made of 1/4" x 2" x 3" angle iron, don't think that will bend. I can even slide the forks in from the back side if I need a tail gate. I thought about stack pockets for side boards, but I mainly need several places to chain or rope things on, I guess this would give me the best of both worlds. I plan on hauling my JD LT133 mower on it and a portable work bench.
DDT

 

[TraderMark]

Great job DDT......
Looks like something that I may be able to use.
Thanks for sharing.

 

[Harv]

Great project, and well done! /w3tcompact/icons/smile.gif

I've had several occasions when I could have used that thing, Dana. I guess my own project list just got longer. /w3tcompact/icons/crazy.gif

Thanks for sharing.