Oh yeah, sorry I didn't respond Richard, it is a gasser. I should have provided more background, I replaced both the points and condensor a couple of weeks ago, when it was running poorly, it was OK when not under load, but spitting and sputtering and stalling when loaded up. I replaced the points and condensor, and set the gap to .022. When it didn't fire properly, I opened the point gap, by eye to where around the old ones were (these were badly burned). She fired right up, and I left it. Well, the other night it started spitting again, I pulled the points again (after my first post here) and see that they are fairly worn, considering how new they are. The guy I'm borrowing it from suggests a ballest resistor, I'm going to pick up a new set of points and BR tonight and install them.
Bri