Case IH JX75 Hydraulic Issue

   / Case IH JX75 Hydraulic Issue #1  

Beef99

New member
Joined
Feb 24, 2012
Messages
3
Location
Fulton, Kansas
Tractor
Case IH JX75
I was mowing hay last night and everything seemed to be going ok, until I tried to raise the mower. The hydraulic arms would not raise, I then tried to raise the FEL and it wouldn't raise either. I needed to finish mowing the field so I kept going and kept trying the hydraulics every once in awhile. Finally a while later everything started working again. Not sure what is going on, anyone have any suggestions. Also, I have noticed lately that the power steering is not as effective as it normally is (little harder to steer).
 
   / Case IH JX75 Hydraulic Issue #2  
Check your fluid levels, check screens if you have them,check filters, check that the valves are not in relief .

Use a pressure gage to determine if and where you have pressure and how much.
 

Tractor & Equipment Auctions

1994 Generac Olympian 3054 125kVA 3-Phase Diesel Generator (A55851)
1994 Generac...
2015 CASE CX300C EXCAVATOR (A52707)
2015 CASE CX300C...
2018 MERTZ FRAC CHASSIS W/ENGINE & TRANS (A55745)
2018 MERTZ FRAC...
SKID STEER FORKS (A53843)
SKID STEER FORKS...
2012 Chevrolet Colorado Ext. Cab Pickup Truck (A55852)
2012 Chevrolet...
30008 (A53424)
30008 (A53424)
 
Top