Jul 28, 2013 / Cat 1 attachment too narrow for cat 2 3-point #11 Tx Jim New Member Joined Jan 26, 2007 Messages 10,343 Location Coyote Flats,Tx Tractor JD 4255/Kubota M7040 HDC Have you switched sway blocks(parts key #14) to their narrow(Cat l) position? If that doesn't remedy the problem then just leave sway blocks off. Attachments R10050_________UN01JAN94.gif 14.6 KB · Views: 173
Have you switched sway blocks(parts key #14) to their narrow(Cat l) position? If that doesn't remedy the problem then just leave sway blocks off.
Jul 31, 2013 / Cat 1 attachment too narrow for cat 2 3-point Thread Starter #12 OP M MNBobcat Platinum Member Joined Mar 28, 2009 Messages 803 TX Jim, Thanks. I didn't know about the sway blocks. I removed them and it now works great!
Aug 1, 2013 / Cat 1 attachment too narrow for cat 2 3-point #13 Tx Jim New Member Joined Jan 26, 2007 Messages 10,343 Location Coyote Flats,Tx Tractor JD 4255/Kubota M7040 HDC The sway blocks should fit in their narrow position for Cat l implements.
