HayDR
Veteran Member, Approved Advertiser
Implement end CAT 1 & 2, Tractor end CAT 1 with the double piloted check valve
19" to 27"
Thank You for your patience
Mark Carter
Toplink CCM Hydraulic TopLinks have arrived!
- Thread starter HayDR
- Start date
- Views: 1052
Implement end CAT 1 & 2, Tractor end CAT 1 with the double piloted check valve
19" to 27"
Thank You for your patience
Mark Carter
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
I need some help filling out your Custom Fit questions on your website.
I have a 2005 KAMA 554 tractor, are you familiar with that model? I don't know if it has a closed or open center on its hydraulic system. I do know there are two levers that operate the hydraulic ports to the rear. It has two exterior sets in the rear.
I am attaching a picture of the rear end where you can see the connections, the top and side links too. Please send me a PM because I want to purchase a complete system from you. I want to make sure it will fit and work properly.
I have a 2005 KAMA 554 tractor, are you familiar with that model? I don't know if it has a closed or open center on its hydraulic system. I do know there are two levers that operate the hydraulic ports to the rear. It has two exterior sets in the rear.
I am attaching a picture of the rear end where you can see the connections, the top and side links too. Please send me a PM because I want to purchase a complete system from you. I want to make sure it will fit and work properly.
Attachments
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
</font><font color="blue" class="small">( I need some help filling out your Custom Fit questions on your website. Please send me a PM because I want to purchase a complete system from you. I want to make sure it will fit and work properly. )</font>
Attached is another photo of the side links on the tractor.
Attached is another photo of the side links on the tractor.
Attachments
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Since you already have 2 rear remotes all you would need is a top link cylinder and a side/tilt link cylinder and corresponding hoses and fittings. You do not need any additional valves. Just measure your top and side links for max and min extensions and order the appropriate cylinders from CCM.
dieselmotorhead
Bronze Member
Big Brown Goodie truck just dropped mine off from C&CM. Will have to wait till wed to put it on. Side link next year- I hope.
OP
HayDR
Veteran Member, Approved Advertiser
To quote an old Bartles and James line " Thank you for your support."
Mark Carter
Mark Carter
Bigorange121
Member
Bigorange121
Member
More photos in the tractor album from the link in my sig.
OP
HayDR
Veteran Member, Approved Advertiser
Made in Spain.
We have missed you Erol where have you been?
We have missed you Erol where have you been?