CH3510 Fel

   / CH3510 Fel #11  
I think they all get the 4030 loader now (or whatever model # is - they changed to where open & cab all use same one). Good question for dealer, but was a recent change I think.
 
   / CH3510 Fel #12  
I have owned two. I purchased the standard open station model when they first came out. I owned it approximately 2 1/2 years. Had a couple small issues the dealer took care of. It has been a great tractor and has done everything I’ve thrown at it. I decided I wanted to upgrade to a cab model for the same reason you mentioned above.
I got R4 industrial tires with the first one and this time I decided to get the turf tires because I use it a lot on my lawn and figured in my situation they would be best. So far I do like them better. I wasn’t planning on filling them this time but I have now decided too.
As far as the cab goes..... NO REGRETS. It has a very nice fit and finish. Only two small complaints would be that it came with no 12V socket and both front and back work lights are both on one switch. Not a big issue as these are easy fixes.
The first tractor came with a kl4010 loader and this new one came with a kl4030. From my research it seems the kl4010 and kl4030 are very similar with a couple small changes. Lift capacity is the same. The kl4020 lift capacity is I think 100lbs more but max height is a little shorter than the kl4010/30. The bucket on the kl4020 is different than the kl4010/30. Although they have small differences in the specs I’m glad I got the 30 over the 20 but would have liked to get the bucket that’s on the 20.
I’d definitely recommend the cab
Hope this helps.


So you have owned multiple ck3510ç—´.
How long do keep them?
You obviously are a fan since you have had more than 1.
 
   / CH3510 Fel #13  
HDoilcan....I just got a 4010 with cab, and I have a 12v. It's hiding low on the left side as you sit in the seat. On mine anyways. I'm assuming they all came that way? Hope this helps you..
 
   / CH3510 Fel
  • Thread Starter
#14  
Thank you, Very helpful.
It is nice to hear that you liked the first enough to spend your money on another of the same basics model + cab.
 
   / CH3510 Fel
  • Thread Starter
#15  
I called the next closest dealer who is about an hour away.
They don稚 have a cab CK3510se or CK4010se either and don遞 have any on order.
I understand that inventory is expensive and both dealers said cab versions don遞 sell real well around here.
But how is a customer to know if they want the cab unless the can actually see and experience it.
I don遞 want to order the tractor only to find I feel cramped in a cab with little to no room to move. Or that there are too many blind spots or a number of other possible issues.
I will say that when speaking with both dealers they had s lot of good things to
Say about Kioti and their warranty support.
 
   / CH3510 Fel #16  
Thanks for letting me know.
What’s funny is today I installed the radio and afterwards I took it for a ride through the yard to see how the radio sounds as the tractor is moving etc. as I’m driving I hear something like a washer hitting the floor behind my seat. So I stop and kinda turned while sitting in the seat to check behind the seat and yup I seen the 12v socket. Although an acward spot to have it I’m glad there’s is one.
Never found what sounded like a washer hitting the floor.

HDoilcan....I just got a 4010 with cab, and I have a 12v. It's hiding low on the left side as you sit in the seat. On mine anyways. I'm assuming they all came that way? Hope this helps you..
 
   / CH3510 Fel
  • Thread Starter
#17  
My local dealer called late yesterday evening.
He located a CK3510se hc about 90 minutes from home.
Hope to make a road trip this coming week.
 
   / CH3510 Fel
  • Thread Starter
#18  
I finally got to see and test drive a CK3510SEHC.We also did a liader lift test 1600 lbs on a skid.
Was able to get it off the ground but was in desperate need of ballast. I am convinced it will handle my totes of wood.
Cab was roomy and did not obstruct my view as much as I feared.
Bottom line I was impressed and ordered one from my local dealer.
My wife and I are leaving on vacation Monday.
Tractor should be in by the time we get back in 2 weeks.
 
Last edited:
   / CH3510 Fel
  • Thread Starter
#19  
I finally got to see and test drive a CK3510SEHC.We also did a loader lift test 1600 lbs on a skid.
Was able to get it off the ground but was in desperate need of ballast. I am convinced it will handle my totes of wood.
Cab was roomy and did not obstruct my view as much as I feared.
Bottom line I was impressed and ordered one from my local dealer.
My wife and I are leaving on vacation Monday.
Tractor should be in by the time we get back in 2 weeks.
 
   / CH3510 Fel #20  
congrats!
 

Tractor & Equipment Auctions

2014 Brent 1596T Dual Auger Grain Cart (A50657)
2014 Brent 1596T...
(INOP) CATERPILLAR TL943 TELESCOPIC FORKLIFT (A50459)
(INOP) CATERPILLAR...
Komatsu D39PX-24 Crawler Tractor Dozer (A49346)
Komatsu D39PX-24...
2002 CASE INTERNATIONAL MX270 TRACTOR (A51243)
2002 CASE...
2015 KUBOTA M5660SU 4X4 FARM TRACTOR (A51243)
2015 KUBOTA...
2013 John Deere 310SK (A47384)
2013 John Deere...
 
Top