newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,840
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
<snip>
But if you cut any amount of firewood at all, I would want something a little bigger for a 1 saw plan.
you need a 3 saw plan if your firewood gets over 18" in diameter.if you cut any amount of firewood at all
One man one wife - ok
One man one saw - not ok.
It's dang handy to have a little 35cc limbing saw, especially when you are in the cut with another saw and a sudden wind twists the tree and pinches your bar. It feels good to walk out with a muff modded, ported 660 and a 42" bar to cut the big ones.
If all you do is limb an occasional tree or be ready for an emergency one saw is ok. For most of it's existence my Stihl 021 was used to cut up dead fallen limbs on my little 1/4 acre lot, and an occasional neighbors tree after a storm. It replaced my $10 buck saw. The 021 probably had less than 20 hrs use over 10 years. In the last 3 years it's probably seen 100 hours of use. And it's the smallest, oldest saw.
But since I started pretending to be a sawyer I knew even 2 saws won't do for me.
The OP should get a 60cc size pro saw from someone who can support him locally and at his leisure find out how to fix the Husky.
One reason I went with Stihl is that I've had several instances of strong wind damage (trees down, lots of old limbs fallen) and it's not the situation where I would want to wait for mail order maintenance or spare parts. If my saw breaks I want to be able to walk into the local shop and get it fixed and get back to the problem.