RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Could not find the thread where the OP posted a nice picture of the fuel filter.
Near 400 hours; so, I changed it on the 2025R. Gen. 1 only has the fuel bowl filter. Got 3 of them from someone here who'd gone to another tractor and had them left over.
The ring came off relatively easy with some channel locks, but I had to remove the filter assembly by removing the long, small bolt holding it in place to get the ring back on. Just could not get it tucked up enough with gravity pulling on the bowl, etc.
The shut-off valve works in the proper direction, e.g. not in the other direction where it was easy to hit it with ones foot like on the 1025R and accidently shut it off.
Ralph
Near 400 hours; so, I changed it on the 2025R. Gen. 1 only has the fuel bowl filter. Got 3 of them from someone here who'd gone to another tractor and had them left over.
The ring came off relatively easy with some channel locks, but I had to remove the filter assembly by removing the long, small bolt holding it in place to get the ring back on. Just could not get it tucked up enough with gravity pulling on the bowl, etc.
The shut-off valve works in the proper direction, e.g. not in the other direction where it was easy to hit it with ones foot like on the 1025R and accidently shut it off.
Ralph
