marrt
Platinum Member
<A target="_blank" HREF=http://www.bobcat.com/products/twm/index.jhtml>http://www.bobcat.com/products/twm/index.jhtml</A>
Check this out !
- Thread starter marrt
- Start date
- Views: 920
cpicton1
Silver Member
Wow, now that is some cat!
Inspector507
Super Member
I saw one today at the Power Show in Ohio. Had 4 wheel steer and a 24" auger mounted on the front.
davesisk
Platinum Member
With a popular brand-name attached, I'll be this sucker ain't cheap, either!
Dave
Dave
OP
marrt
Platinum Member
Try $30K with no attachments.... Sure is purty though.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,543
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Rat started a thread on this back in November. <A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showflat.pl?Cat=&Board=other&Number=202243&page=&view=&sb=&o=&vc=1>click here to read it </A>
It is pricey to me, but to a contractor or construction company, it might be just the ticket. Pretty impressive machine, isn't it?
It is pricey to me, but to a contractor or construction company, it might be just the ticket. Pretty impressive machine, isn't it?
davesisk
Platinum Member
$30K...man, that would buy several well-equipment 400's!
OP
marrt
Platinum Member
<A target="_blank" HREF=http://www.bobcat.com/products/twm/images/mainGraphic.jpg>Picture Of Toolcat</A>
I wonder if PT has patents on the articulating design. Seems like it would be much easier to make the tractor articulate rather than design the complicated 4 wheel steer/4 wheel drive/independent suspension setup on the Toolcat.
Anyway, I think we can adapt the PT to put a small bed above the engine like the Toolcat. It would involve moving the fan and radiator to the back. I think that’s a good idea anyway because that’s the way the engine fan is blowing (on the PT400’s) and such a design would compliment engine and engine compartment cooling. Looks like the oil cooler might fit without much effort.
I would like to have a bed on the PT because I frequently find myself needing to haul stuff while using the FEL. Also, such a design would allow easy access to anything in the bed without having to leave the tractor seat…like cold beverages for example. The BX guys brag about their cup holder. What about an entire cooler holder? Hmmm.
I wonder if PT has patents on the articulating design. Seems like it would be much easier to make the tractor articulate rather than design the complicated 4 wheel steer/4 wheel drive/independent suspension setup on the Toolcat.
Anyway, I think we can adapt the PT to put a small bed above the engine like the Toolcat. It would involve moving the fan and radiator to the back. I think that’s a good idea anyway because that’s the way the engine fan is blowing (on the PT400’s) and such a design would compliment engine and engine compartment cooling. Looks like the oil cooler might fit without much effort.
I would like to have a bed on the PT because I frequently find myself needing to haul stuff while using the FEL. Also, such a design would allow easy access to anything in the bed without having to leave the tractor seat…like cold beverages for example. The BX guys brag about their cup holder. What about an entire cooler holder? Hmmm.
cpicton1
Silver Member
marrt,
<font color=blue>I wonder if PT has patents on the articulating design.</font color=blue>
<A target="_blank" HREF=http://www.steinerturf.com/prod13.htm>http://www.steinerturf.com/prod13.htm</A>
The engine is under the seat but it does Articulate and Oscillate. /w3tcompact/icons/smile.gif
<font color=blue>I wonder if PT has patents on the articulating design.</font color=blue>
<A target="_blank" HREF=http://www.steinerturf.com/prod13.htm>http://www.steinerturf.com/prod13.htm</A>
The engine is under the seat but it does Articulate and Oscillate. /w3tcompact/icons/smile.gif
