Chipper Chipper shredders (CS) revisited
- Thread starter patrickg
- Start date
- Views: 16626
W (MR. Shubert?),
Thanks for your comments. I'll try to find something used, working, and maintainable either way I go, tractor mount/PTO or stand alone. My tractor is rated for 39 HP at 540 RPM on the PTO output but the engine is approaching relativistic speeds or so it sounds to run at PTO speed. I virtually never run at PTO speed and when I do it is for specific short periods like eating a particularly tough tree with the brush hog.
Patrick
Thanks for your comments. I'll try to find something used, working, and maintainable either way I go, tractor mount/PTO or stand alone. My tractor is rated for 39 HP at 540 RPM on the PTO output but the engine is approaching relativistic speeds or so it sounds to run at PTO speed. I virtually never run at PTO speed and when I do it is for specific short periods like eating a particularly tough tree with the brush hog.
Patrick
MajMac392
Gold Member
- Joined
- Jan 8, 2002
- Messages
- 411
- Location
- Southern Maine
- Tractor
- Cub Cadet 7234, John Deere X300 Riding Lawn Mower
Has anyone had any experience with the DR PTO Chipper that countryhomeproducts sells? They don't have it on their website but I understand it is a special order, and handles up to 4 1/2" trees. Goes for about $2000 plus shipping.
Thanks.
Thanks.
HSFarmer
New member
I am also interested in any information on the DR. I am wrestling with the choice of stand alone, or a PTO driven model.
BillG_in_TX
Veteran Member
I'm also looking for an affordable PTO chipper. I received this reply from Country Home (note 30 day free trial):
Thank you very much for your recent message. We appreciate your interest in our products.
We do offer a P.T.O. CHIPPER/SHREDDER. It is available as a special order item (it's not featured in our literature or on our website). The list price for the P.T.O. CHIPPER/SHREDDER (Item #139637) is $2,295.00.
However, if you order now you can enjoy our off-season price of $1,999.00. Depending on which delivery option you choose, shipping to the contiguous 48 United States is an additional $109.00 to $218.00.
The P.T.O. CHIPPER/SHREDDER requires a minimum tractor power of 16 HP (50 HP maximum). The recommended P.T.O. speed is 540 RPM. The P.T.O. CHIPPER/SHREDDER mounts on a Category 1, 3-point tractor hitch. The unit is capable of chipping limbs up to 4 1/2" thick and shredding branches up to 1 1/2" thick. The P.T.O. CHIPPER/SHREDDER features 48 reversible shredder hammers and two chrome steel chipping knives, which are 5 1/4" long.
The machine housing is constructed of 7-gauge steel. The chipper hopper is made of 14-gauge steel (10-gauge steel for the chipper chamber). The top of the chipper opening is 8" x 11" (the opening for the shredder hopper is approximately 18 1/2" x 9 1/2"). Crated dimensions of the unit are 53" L x 35" W x 48" H (shipping weight: 460 lbs.).
The unit comes with a 30-Day Trial period. This means that you may return the P.T.O. CHIPPER/SHREDDER within 30 days after first using it if you're not completely satisfied. We will provide you with a refund of the product's purchase price and your original shipping fee, but because it's a special order item you would be responsible for the return shipping fee.
To place an order, please call TOLL-FREE 1-800-854-2588 and ask to speak with a Lead Customer Service Representative. Indicate to our Representative that you wish to order Item #139637. The P.T.O. CHIPPER/SHREDDER cannot be ordered online. If you ordered a P.T.O. CHIPPER/SHREDDER, it would ship out in approximately three weeks. Our call center is currently open Monday thru Friday, 8 am to 9 pm, Saturday 8:30 am to 7 pm, and Sunday 9 am to 5 pm, Eastern Standard Time.
Thank you again for your message. We look forward to hearing from you soon.
Sincerely,
Erin Bermingham
Customer Relations
www.countryhomeproducts.com.
---------------------------------------------------------------------------
Country Home Products(R) --- DR(R) Power Equipment
Meigs Road, P.O. Box 25 Phone: 1 (800)446-8746
Vergennes, Vermont 05491 Fax: (802)877-1213
---------------------------------------------------------------------------
DR(R) is a registered trademark of Country Home Products(R)
Thank you very much for your recent message. We appreciate your interest in our products.
We do offer a P.T.O. CHIPPER/SHREDDER. It is available as a special order item (it's not featured in our literature or on our website). The list price for the P.T.O. CHIPPER/SHREDDER (Item #139637) is $2,295.00.
However, if you order now you can enjoy our off-season price of $1,999.00. Depending on which delivery option you choose, shipping to the contiguous 48 United States is an additional $109.00 to $218.00.
The P.T.O. CHIPPER/SHREDDER requires a minimum tractor power of 16 HP (50 HP maximum). The recommended P.T.O. speed is 540 RPM. The P.T.O. CHIPPER/SHREDDER mounts on a Category 1, 3-point tractor hitch. The unit is capable of chipping limbs up to 4 1/2" thick and shredding branches up to 1 1/2" thick. The P.T.O. CHIPPER/SHREDDER features 48 reversible shredder hammers and two chrome steel chipping knives, which are 5 1/4" long.
The machine housing is constructed of 7-gauge steel. The chipper hopper is made of 14-gauge steel (10-gauge steel for the chipper chamber). The top of the chipper opening is 8" x 11" (the opening for the shredder hopper is approximately 18 1/2" x 9 1/2"). Crated dimensions of the unit are 53" L x 35" W x 48" H (shipping weight: 460 lbs.).
The unit comes with a 30-Day Trial period. This means that you may return the P.T.O. CHIPPER/SHREDDER within 30 days after first using it if you're not completely satisfied. We will provide you with a refund of the product's purchase price and your original shipping fee, but because it's a special order item you would be responsible for the return shipping fee.
To place an order, please call TOLL-FREE 1-800-854-2588 and ask to speak with a Lead Customer Service Representative. Indicate to our Representative that you wish to order Item #139637. The P.T.O. CHIPPER/SHREDDER cannot be ordered online. If you ordered a P.T.O. CHIPPER/SHREDDER, it would ship out in approximately three weeks. Our call center is currently open Monday thru Friday, 8 am to 9 pm, Saturday 8:30 am to 7 pm, and Sunday 9 am to 5 pm, Eastern Standard Time.
Thank you again for your message. We look forward to hearing from you soon.
Sincerely,
Erin Bermingham
Customer Relations
www.countryhomeproducts.com.
---------------------------------------------------------------------------
Country Home Products(R) --- DR(R) Power Equipment
Meigs Road, P.O. Box 25 Phone: 1 (800)446-8746
Vergennes, Vermont 05491 Fax: (802)877-1213
---------------------------------------------------------------------------
DR(R) is a registered trademark of Country Home Products(R)
Timd
Bronze Member
I also have been looking into 3PH chippers. Tractorman gave me some good prices on the big three (Patu, Danuser, Valby) and also mentioned that there is an outfit out of Vermont which makes 3PH chippers which many people are happy with. Maybe DR is the place he was thinking of.
It looks like this is a 3PH version of the 18HP gas chipper/shredder which you can see on DR's web page. A couple of things I would check out before taking the plunge:
Knife and hammer availability and replacement costs. I am currently using a Troy chipper which I am looking to replace with something bigger. When I went looking for replacements I found Troy had gone into bankruptcy and parts were unavailable from them.
"Reversible hammers"...are these two way or four way reversible? A set of 48 replacement hammers is going to be a hunk of change, so 4-way would be nice.
I really like the Danuser 18P but have issues with the design of the 18P and some other chippers like the DR one. The chipping intake chute is high and angled way up. I read all these comments about "chips 4 inch trees, branches leaves, and all" and wonder how I'm going to lift a 4 inch tree and feed it in from that angle. Maybe an occasional tree but feeding brush at that angle all day is going to be slow and exhausting. The chipper chute location has me leaning towards the Patu DC40 which has a better intake location.
Timd
It looks like this is a 3PH version of the 18HP gas chipper/shredder which you can see on DR's web page. A couple of things I would check out before taking the plunge:
Knife and hammer availability and replacement costs. I am currently using a Troy chipper which I am looking to replace with something bigger. When I went looking for replacements I found Troy had gone into bankruptcy and parts were unavailable from them.
"Reversible hammers"...are these two way or four way reversible? A set of 48 replacement hammers is going to be a hunk of change, so 4-way would be nice.
I really like the Danuser 18P but have issues with the design of the 18P and some other chippers like the DR one. The chipping intake chute is high and angled way up. I read all these comments about "chips 4 inch trees, branches leaves, and all" and wonder how I'm going to lift a 4 inch tree and feed it in from that angle. Maybe an occasional tree but feeding brush at that angle all day is going to be slow and exhausting. The chipper chute location has me leaning towards the Patu DC40 which has a better intake location.
Timd
pennwalk
Veteran Member
Do any of you have a Bushhog C/S or the Goshen C/S ? They look like the same machine. There are also a lot of simalarities with the Bearcat/Woods C/S. I wondered if Bearcat made the Bushhog unit. One difference is that the Bushhog shredder shoot has a metal hood over it with a rubber flap that guards the opening. How does the shredder shoot work? Does the material drop in easily? Does any of the material fly back out? The bearcat and bushhog machines appear to be very close. I was wondering if I could adapt the hood and Flap from a Bushhog to my bearcat and do away with the bruch style guards.
Chris
Chris
BillG_in_TX
Veteran Member
WSchubert,
Maybe yours is the same unit that EFC is selling for $1600 now?
See <A target="_blank" HREF=http://www.efcconstruction.com/BackhoeandImplements.htm> EFC Construction </A>.
"$1600.00- This is a solid unit. Simple design uses common parts. 24" fly wheel allows even small tractors to power this unit. Self feeding, chips up to 6" material. Price includes top link for three point. "
Still lookin'
Bill
Maybe yours is the same unit that EFC is selling for $1600 now?
See <A target="_blank" HREF=http://www.efcconstruction.com/BackhoeandImplements.htm> EFC Construction </A>.
"$1600.00- This is a solid unit. Simple design uses common parts. 24" fly wheel allows even small tractors to power this unit. Self feeding, chips up to 6" material. Price includes top link for three point. "
Still lookin'
Bill
Timd
Bronze Member
Looks remarkably like the <A target="_blank" HREF=http://www.boltonpowerequip.com/woodchippers.html>Bolton Power Equipment</A> China import chippers. But EFC has a much better price.
Timd
Timd