CK-25HST still in the crate

[JayC]

One thing I noticed about the CK25 & 30 is that Kioti is doing something different with their amber/red lights than the traditional ROPS mounted ones. One thing that I am wondering is, when you have the FEL on, will it block the ambers down front on that guard thing on the platform? And what is the white light under the amber on that guard? A lower mounted headlight? If it is, I think that would be a big bonus for those with a FEL.

 

[KiotiKevin]

I am eagerly waiting pictures of the CK25 & 30's - Who is going to be the Santa Clause of Tractor Net and bring them too us !!! I know one thing and that is, I have my digital camera all charged up and ready to go if I have a siteing ! <font color="red"> </font> .

Kevin

 

[KiotiKevin]

Sorry wrong spelling - sighting. Everybody stay tuned, this could be the most exciting thread yet !!

Kevin

 

[burnercan]

Don, Looking at the specs there is a difference in the Min ground clearance, overall height, overall width and approx 60m lbs heavier. The CK 30 being a bit larger. Everything else appears the same with the exception of the engine. /forums/images/graemlins/tongue.gif

 

[burnercan]

Sorry, typo. Should be 60 lbs. Gotta use spell cehck!!

 

[KiotiJohn]

</font><font color="blue" class="small">( Don, Looking at the specs there is a difference in the Min ground clearance, overall height, overall width and approx 60m lbs heavier. The CK 30 being a bit larger. Everything else appears the same with the exception of the engine. )</font>
I just looked at the specs on the site, and they have them as equal width and height: Width: 54.6", ground clearance: 13.82. Do you have some other specs, say a brochure? Maybe they haven't updated the site. That's no unusual. John

 

[yoyo]

John I agree. The brochure only shows a difference in horsepower. Everything else is the same.

 

[KiotiKevin]

Eric,
Could you indicate where you found those specs. ? Thanks

Kevin

 

[shoppintractors]

The specs that show the differences you pointed out are from an earlier brochure. The Kioti website and the most current brochure show the CK25/30 being equal in all areas except for the horsepower.

(You can use the edit key and go back and make corrections, for up to 12 hours, to your original post, opposed to making a new reply.)

Don

 

[burnercan]

I printed it from Carver Equipment on 5/17/04. Maybe it is out of date?? /forums/images/graemlins/crazy.gif
I just printed it again and it's the same?? If everyone else has different info I would guess the info on theCarver site is outdated.
Just looked at the Kioti site and you guys are correct. they are the same. My apology.
I understand that a lot can happen from prototype to production and comparing the two data points is interesting. I think it may give some insite as to what they were originally thinking of doing. I wonder why they changed their mind? Cost may have been a factor because tooling changes are expensive.