Ck20S HSt

/ Ck20S HSt #1  

lunbrjck

Bronze Member
Joined
Mar 14, 2008
Messages
89
Here are a couple pics of my new Kioti
Pic of the back of the tractor 4" extension on axles
Welded hooks
My 2 tractors side by side
 

Attachments

  • P1010002.JPG
    P1010002.JPG
    431.5 KB · Views: 488
  • P1010005.JPG
    P1010005.JPG
    421.5 KB · Views: 464
  • P1010009.JPG
    P1010009.JPG
    445.5 KB · Views: 465
/ Ck20S HSt #2  
Looks good,
I am looking at the CK20 as well (and CK30, Mahindra 2615, Cub 3200)
Tell me about the Axle extensions ?, did You widen the front too ?

Thanks,
Slack
 
/ Ck20S HSt
  • Thread Starter
#3  
No just widened the back everything I have is on a hillside
My dealer has the extensions made at a local machine shop he sells the 4 inch and 6 inch extensions
 
/ Ck20S HSt #4  
Those spacers look awesome lumbjck, Where can i get a set for my ck30, any idea for pricing? Matt
 
/ Ck20S HSt
  • Thread Starter
#5  
Hi Matt got my tractor at
Johnston Equipment, LLC
1617 Berlin Road
Weston WV 26452
304-269-5155
I think they were $400.00 installed for the 4" spacers
 
/ Ck20S HSt #6  
Hi lunbrjck. I wish you many safe & productive hours. Thanks for the pics, but that garage is too clean (wish mine was - see my pic in the Locking Fuel Cap thread). Post some action pics soon.
 
/ Ck20S HSt #7  
Welcome to the Pack!

Cool idea on wideing the rear track for hill stability.
 
/ Ck20S HSt
  • Thread Starter
#9  
Hi Nick
Yes they are wheel spacers attached is a pic
 
/ Ck20S HSt
  • Thread Starter
#10  
Hi again the pic didnt come through sending again
 

Attachments

  • P1010016.JPG
    P1010016.JPG
    437.8 KB · Views: 392
/ Ck20S HSt #11  
Lnbrjck,
Thanks for the pics :)
Did you get the front widened ?
Did the dealer put them on ?, Some people mentioned that spacers may put to much extra "twisting" presure on the axle bearings, and may "effect" the warranty ?
Is that the slock bucket ?, the Bobcat CT120 bucket looks much smaller.
Thanks,
Slack
 
/ Ck20S HSt
  • Thread Starter
#12  
Hi Slack
No didn't get the front widened. Yes the dealer installed the spacers. Hope he will stand good if the wheel bearing go. The bucket is the KL120B.
 
/ Ck20S HSt
  • Thread Starter
#13  
Just finished mounting the Markham Welding toothbar to my bucket. It is pouring the rain down so won't get to try it out for awhile.
 

Attachments

  • P1010021.JPG
    P1010021.JPG
    440.6 KB · Views: 186
  • P1010019.JPG
    P1010019.JPG
    434.8 KB · Views: 211
/ Ck20S HSt #14  
ahhhhh:) I remember when my ck20 was so nice and shinny with no scratches in it. doesnt take long.

GL with the beast

Ken
 

Marketplace Items

2007 International 4300 S/A Dump Truck (A64556)
2007 International...
2012 CASE CX350C EXCAVATOR (A65053)
2012 CASE CX350C...
2018 Freightliner Cascadia 125 Truck T/A Sleeper Cab Truck Tractor (A64194)
2018 Freightliner...
Barrel (A64557)
Barrel (A64557)
1995 Khronert 307 SS Single Comp 6,500 Gallon Insulated T/A Chemical Tanker Trailer (A64194)
1995 Khronert 307...
Trump 2025 Sign (A64557)
Trump 2025 Sign...
 
Top