Oil & Fuel ck2610 hst hydraulic and hst filter question

[scottydont]

Also a reply to an old thread but the most applicable. I completed the 50hr service and am refilling the hydraulic fluid due to the loss when changing the filters. My guess is I lost around 1 gallon.

In the manual, the acceptable level is shown as between the bottom of the dip stick and the first line as the picture shows attached. However, the oil dipstick/cap looks the same as the one manual shows for the front axle that has a high mark of the plug itself.

So do I fill between the two bottom lines (A and B) or do I fill closer to the actual plug like the front axle?

 

[DK35vince]

B in your second picture (top row) is the full line

 

[CPTKILLER]

That is good because I just finished a 50 hour service on my CK2610. That is where mine is at.