Mowing CK30 HST Belly mower removal

   / CK30 HST Belly mower removal #1  

rk20033

New member
Joined
Oct 29, 2005
Messages
13
Location
N.E. Ohio
I need to remove the belly mower from my tractor. I unhooked the drive shaft and then 4 pins that hold it to the frame. It slides around nicely on the floor, but I can not seem to figure out how to get the gear box on the mower past the
framework on the tractor. I thought about jacking up the tractor but I thought there had to be a better way.

Thanks,

Vince
 
   / CK30 HST Belly mower removal #2  
Do you have a FEL on the tractor? Use it to lift the front end by pushing the bucket into the ground. If not get a set of car ramps to drive the front end up on. You only need a couple of inches so don't have to drive it all the way up the ramps.
Faced the same dilema first time I took the mower off my ck20.
 
   / CK30 HST Belly mower removal #3  
If it's like the CK20, it will come out much easier on one side than the other.
Ditto on what pilonidal said, we have also used 4x6's to get the front up a little.
KO
 
   / CK30 HST Belly mower removal
  • Thread Starter
#4  
Thanks all for the help. I do have a fel, it did work great.
 
   / CK30 HST Belly mower removal #5  
Hello Rk, Im curious what size belly mower your using with the ck30, how does it work as well? Matt
 
   / CK30 HST Belly mower removal
  • Thread Starter
#6  
I have the 60". I got the tractor in October of last year, so I haven't used the belly mower as of yet. I will have to wait till spring to find out.
 

Tractor & Equipment Auctions

2019 Freightliner M2 106 Crew Cab Service Truck (A35915)
2019 Freightliner...
2024 Gold Mountain 20ft x 40ft Dome Container Shelter (New/Unused) (A36338)
2024 Gold Mountain...
3 pt. Pronovost P-540 Snow Blower (A36602)
3 pt. Pronovost...
1999 GMC Sonoma Pickup, (A35430)
1999 GMC Sonoma...
2019 Ford F-250 Pickup Truck (A36338)
2019 Ford F-250...
Reinco TM7-30 Sprigger (A34127)
Reinco TM7-30...
 
Top