Close to buying MX5100

   / Close to buying MX5100 #21  
I didn't know that there were other differences. Going to have to reconsider even though I don't like the whole turbo thing.
 
   / Close to buying MX5100 #22  
I agree with all comments about the MX5100. As for the turbo, I don't know if I could tell the difference in HP but I sure like the sound of that turbo spooling up. Now that is cool.

Oh, being a new tractor owner, I did not appreciate the value of the deluxe telescoping 3ph. I don't know how those without it don't get frustrated attaching various implements. As a novice, it has been great!

Go with the MX5100 4WD. You will be glad you did. :thumbsup:
 
   / Close to buying MX5100 #23  
Roger we traded a NA Case CX80 in on an M8540 with a turbo this summer and with the exception of the cool down which isn't a big thing, I see no reason not to go with a turbo to get the added stuff on the MX5100.

I believe a L4740 will have all the goodies and be non turbo, but you will pay for it.
 
   / Close to buying MX5100 #24  
Hmmm, that's interesting. One of the main reasons I went with the MX vs the L series was the improved 3PH including the telescoping lower link ends and stabilizers. I thought both models had this but upon closer review I see that the brochure does note this is for the MX5100 only (and the 4x4 model at least according to the 2009 brochure I have)

Have you bought your MX4700 yet? If not, tell your dealer to add this to the 4700 if he wants to sell one.
 
   / Close to buying MX5100
  • Thread Starter
#25  
Have you bought your MX4700 yet? If not, tell your dealer to add this to the 4700 if he wants to sell one.

No I'm good - I was always buying the MX5100 (more because it was on the lot and ready to go to my specs vs anything else). I would have picked the 4700 if it was available and on the lot with the same 3PH.

Cheers, Hugh
 
   / Close to buying MX5100 #26  
I've had concerns about turbos as well, but in reality they are quite durable and can often be rebuilt rather cheaply. Turbos are on the majority of diesels, from cars, trucks, big rigs, dozers, front end loaders, etc. Use good quality oil, keep the air filter clean and let it cool down a bit after use. Good precautions for any engine really.
 
   / Close to buying MX5100 #27  
Bought an MX5100 a year ago. Great tractor. Love the simplicity of it.
 
   / Close to buying MX5100
  • Thread Starter
#28  
Good idea for a firewood carrier!
 
   / Close to buying MX5100 #29  
Had my MX5100 for a year now with 105 hours. Wouldn't hesitate to buy it again. Good tractor.
 
Last edited:
   / Close to buying MX5100
  • Thread Starter
#30  
It arrived yesterday and so far it's great. Somehow looking at it on my property, the size 'just fits'. The 3800 would have been too small. I managed to clear a spot beside my garage for the implements, take a full bucket of rocks down to a creek to stabilize a culvert and turn a large compost pile!

One learning is to invest in the telescoping 3PH or quick hitch of some sort. Swapping implements would be a major pain without this. Waiting for the tiller to arrive this week.

Will take it easy for a bit as the land is still soft and, with loaded tires, I don't want to damage the trails. I stayed out of the fields so far.

Pics to follow!
 
   / Close to buying MX5100 #31  
Yes the telescoping 3 point links are a big plus especially with cat 2 impliments which have the captured pin hook up instead of the open end pins on the cat 1. Good luck with your new MX. Nice tractor.
 
   / Close to buying MX5100 #32  
It arrived yesterday and so far it's great. Somehow looking at it on my property, the size 'just fits'. The 3800 would have been too small. I managed to clear a spot beside my garage for the implements, take a full bucket of rocks down to a creek to stabilize a culvert and turn a large compost pile!

One learning is to invest in the telescoping 3PH or quick hitch of some sort. Swapping implements would be a major pain without this. Waiting for the tiller to arrive this week.

Will take it easy for a bit as the land is still soft and, with loaded tires, I don't want to damage the trails. I stayed out of the fields so far.

Pics to follow!

Very nice! Yes, pics are necessary.
 
   / Close to buying MX5100
  • Thread Starter
#33  
Ohh one more thing - as others have noted, the parking brake is awful! Very difficult to engage, never sure if it's engaged, etc.
 
   / Close to buying MX5100
  • Thread Starter
#34  
Home sweet home!
 

Attachments

  • DSC01275.jpg
    DSC01275.jpg
    246.7 KB · Views: 315
  • DSC01292.jpg
    DSC01292.jpg
    254.7 KB · Views: 259
  • DSC01312.jpg
    DSC01312.jpg
    247.7 KB · Views: 280
  • DSC01313.jpg
    DSC01313.jpg
    210.2 KB · Views: 289
   / Close to buying MX5100 #35  
Looking good. I can see you were busy over the weekend.
 
   / Close to buying MX5100
  • Thread Starter
#36  
I think I'm over 2hrs! Now I need to see if a I can get a 55 gal drum of fuel delivered
 
   / Close to buying MX5100 #37  
I've got 28 hrs on my mx51. Finally got a chance to break-her-in a little bit this past weekend.:thumbsup:
 

Attachments

  • IMG00247-20110403-1811.jpg
    IMG00247-20110403-1811.jpg
    246.2 KB · Views: 221
  • hooked up.jpg
    hooked up.jpg
    609.7 KB · Views: 262
   / Close to buying MX5100
  • Thread Starter
#38  
That's a big tiller! What size is that? What are you doing - putting in garden?
 
   / Close to buying MX5100 #39  
It's a 7' baltic tiller and this things got one **** of an appetite. Let me tell ya, when I drop her, she's destroying a little piece of mother earth.:laughing: I'm getting this ground ready for whitetail institute.:thumbsup:
 

Tractor & Equipment Auctions

2013 HINO 338 26FT BOX TRUCK (A59905)
2013 HINO 338 26FT...
2019 KOMATSU D155AX-8 CRAWLER DOZER (A60429)
2019 KOMATSU...
2002 International 9200i Truck (A56438)
2002 International...
2024 JCB 35Z (A60462)
2024 JCB 35Z (A60462)
2014 MERCEDES 2500 CARGO VAN (A59904)
2014 MERCEDES 2500...
2022 CATERPILLAR D3 CRAWLER DOZER (A60429)
2022 CATERPILLAR...
 
Top