davecharles
Bronze Member
My loader came with an adapter designed to T into the supply and return lines that run along the bottom right side of the transmission housing. Only took a few minutes to plumb in.
Cold water tractor loader just ordered!
- Thread starter alpinebigfoot
- Start date
- Views: 6988
Your 186 has a diverter where the high pressure line enters the 3 point. Should be two plugs in top of it. Without being able to look at it I cannot tell you just how it works. Maybe someone with a 186 will chime in. I don't think you should need the hydraulic fittings from Hoye with your 186.
Stumbled across this picture of what I am talking about. http://www.tractorbynet.com/forums/...9662-yanmar-186d-hydraulics-problem-image-jpg
Stumbled across this picture of what I am talking about. http://www.tractorbynet.com/forums/...9662-yanmar-186d-hydraulics-problem-image-jpg
Last edited:
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,898
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST,
did the loader come with a loader valve, or do you have to purchase 1 ? if you have to order 1, will you get joy stick or the 2 stick loader valve, float.non float,PB ??
OP
alpinebigfoot
Silver Member
I will send a picture of what mine looks like soon.
dos0711
Member
Is there an easy way to make it quick attach/detach?
I bought my 2210 DB and my loader and post hole digger from them. Although I was a little disappointed in the fact that my tractor WAS NOT serviced in any way/shape or form and my 4x4 died within an hour of use (locked up, bad bearing) and had to be rebuilt, I LOVE THE LOADER. I picked it all up as they are 8 hours from me and since I rebuilt the 4x4, so far (FINGERS CROSSED) no more issues thanks to the fellas on here and lots of advise.The loader works wonders.
OP
alpinebigfoot
Silver Member
Looks nice. I will be getting the loader next Wednesday. It's sitting an hour away. They don't deliver up here till then. **** mad !
