Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
I purchased a M96 Herd Seeder and was wondering if anyone has it behind a TC33... If so did you have to cut down the pto shaft?
Spreader Compact Seed and Fertilizer Spreader /3 pt lift
- Thread starter kamelgirgis
- Start date
- Views: 6442
thcri
Elite Member
Ohio,
No you should not have to cut down the PTO shaft. I bought the Herd Seeder when I had my TC21D, had to cut the shaft. Traded my 21 in for a 29 and had to buy a new shaft. So the one that comes from the factory should work just fine for you.
A hint, take your slow moving sign off when spreading for ease of grabbing the on/off arm. It gets in the way some.
murph
No you should not have to cut down the PTO shaft. I bought the Herd Seeder when I had my TC21D, had to cut the shaft. Traded my 21 in for a 29 and had to buy a new shaft. So the one that comes from the factory should work just fine for you.
A hint, take your slow moving sign off when spreading for ease of grabbing the on/off arm. It gets in the way some.
murph
