dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,603
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
RE HVAC sizing for ICF structures..... There is free software to help
with heating calculations, including furnace sizing. It can accommodate
wall types, windows, thermal mass. In CA, new houses are required to
have what is called "Title 24" energy calculations, usually done by
specialists who do only that.
Beyond that, it is important to factor in the tightness of a poured-wall
concrete house. Blower door analyses have shown that ICF houses are
often 4x tighter than framed ones. This will require make-up air in the
ventillation system. An air-to-air heat exchanger will be desireable in
cold climates. Furthermore, wood stoves and fireplaces must use outside
air. Hydronic radiant heating is nice, but a ventillation system will still
be needed, so forced air heating can accommodate both.
The forced-air furnace in my house is the smallest one I could find (40KBTU)
for 2000 sf.
with heating calculations, including furnace sizing. It can accommodate
wall types, windows, thermal mass. In CA, new houses are required to
have what is called "Title 24" energy calculations, usually done by
specialists who do only that.
Beyond that, it is important to factor in the tightness of a poured-wall
concrete house. Blower door analyses have shown that ICF houses are
often 4x tighter than framed ones. This will require make-up air in the
ventillation system. An air-to-air heat exchanger will be desireable in
cold climates. Furthermore, wood stoves and fireplaces must use outside
air. Hydronic radiant heating is nice, but a ventillation system will still
be needed, so forced air heating can accommodate both.
The forced-air furnace in my house is the smallest one I could find (40KBTU)
for 2000 sf.