3-Point Hitch Connecting a Hydraulic top Link

[katt68]

Good day,
i have a box blade and am trying to figure out how to connect up a hydraulic top link cylinder to it.
i have the hydraulic cylinder, and i have the hoses.
i am connecting to the 2 rear connections(where i normally connect my backhoe.
i have a 2010 2320 compact tractor.

what do i need to connect this properly and function?
what kind of control do i need?
please advise.
Thanks

 

[Cocre]

Do a search. Lots of examples like this.

http://www.tractorbynet.com/forums/hydraulics/159732-installed-hydraulic-toplink-jd-3320-a.html

I also have a hydraulic side link.

 

[Todd NE WY]

Most likely you are hooking in the power beyond loop which just supplies fluid and a return to the tractor with no valve body involved. Your backhoe has its own valve body. You need to go from the power beyond to a valve to the top link then to the power beyond return hose. This is based off of what I have learned reading TBN.

 

[katt68]

Most likely you are hooking in the power beyond loop which just supplies fluid and a return to the tractor with no valve body involved. Your backhoe has its own valve body. You need to go from the power beyond to a valve to the top link then to the power beyond return hose. This is based off of what I have learned reading TBN.

yeah,
what type of valve do i need?

 

[megaboz]

yeah,
what type of valve do i need?

You need an open center valve.

 

[jd110]

A valve like this will work. Just be sure it is open center. Prince One Spool Control Valve, Model# HC-V-R22 | Control Valves| Northern Tool + Equipment