Snow Attachments Conversoin to FEL PTO driven?

[drmac]

I made a PTO driven hydraulic power pak and converted my old Woods 74 inch blower with a quick change plate and a hydraulic motor. So it's now a front mount on the FEL arms and (so far) working just great on my Kioti DK 50 CAB. With a professional welder ($750) the cost totaled about $3200. I've previously posted details including a parts list.

Contact me with questions if you wish.

DrMac

 

[Chaostamer]

I made a PTO driven hydraulic power pak and converted my old Woods 74 inch blower with a quick change plate and a hydraulic motor. So it's now a front mount on the FEL arms and (so far) working just great on my Kioti DK 50 CAB. With a professional welder ($750) the cost totaled about $3200. I've previously posted details including a parts list.

Contact me with questions if you wish.

DrMac

DrMac - thanks for the note. I saw your post but misread it. Now I get it and am excited about looking into the option. Thanks (and I will more than likely be contacting you - thanks for that offer as well).

 

[drmac]

You're most welcome, TBN is all about helping one another.

DrMac

 

[Willl]

I made a PTO driven hydraulic power pak

He's being shy, he did a really good write up at the below clicky.

((although I'm thinking of a starting a collection up to get him a new camera ))

http://www.tractorbynet.com/forums/snow-removal/228607-hydraulic-conversion-power-take-off.html

 

[drmac]

Thanks Willi. Camera (hum) actually my son beat you to it and gave me a super nifty little pocket job for my birthday.

You haven't told me yet where you found the overload relay you recently mentioned and it's part number, sounds like a great protector of little motors.

DrMac