Copper washers (fuel housing)

[R134a]

Anyone know where I can get them without buying the entire assembly ? These are for the fuel filter on the right side of the tractor (silver bowl).

 

[RNeumann]

I’m sure an auto parts store or good hardware store will have them.

 

[Ortimber]

Napa would have them.

 

[tookielee]

Don't know your location, but if there is a HF nearby...
8 Piece Copper Washer Assortment

 

[R134a]

Don't know your location, but if there is a HF nearby...
8 Piece Copper Washer Assortment

No, no, & no. I have assorted copper washer set(s). No match. I did the auto parts store thing...4 of them, no match. Apparently a non-standard size washer (for the top bolt). Typical Bosch junk.

 

[MarkF48]

SAE and Metric assortments here....... https://www.amazon.com/s?k=copper+washers&ref=nb_sb_noss_1

 

[EddieWalker]

I needed new ones for my fuel lines into and out of my fuel pump for my 555E NH backhoe. The dealer wanted $60 for 4 of them, which is how many I needed. I found them at Messicks for about $2 each I think. I don't know if Messicks deals with your brand, but they have great diagrams that give the part number, and with the part number, you can google it to see where you can find it.

 

[thepumpguysc]

Bosch doesn't make junk.. the gaskets are METRIC..

 

[LouNY]

Measure and search by size, I've been able to find all that I have looked for and usually getting 20-40 of them plus shipping for less then one from the dealer.

 

[Sawyer Rob]

Why not reuse the old ones???

Old ones can be renewed with heat, if needed...

SR

 

[BertZegers]

No, no, & no. I have assorted copper washer set(s). No match. I did the auto parts store thing...4 of them, no match. Apparently a non-standard size washer (for the top bolt). Typical Bosch junk.

The whole world is metric, beside the United states and 2 African countries. Try a Volkswagen car dealer, or a diesel shop.

By the way, if you think Bosch is junk, what do you think of the Ford diesel system like in the "powerstoke" ?