kebo
Elite Member
- Joined
- May 16, 2006
- Messages
- 2,928
- Location
- Lexington, SC
- Tractor
- 2001 John Deere 790 4x4, bar tires
I'm in the process of getting my truck re-painted, the guy is going to do it for $2k. I had three other quotes that were higher, really none that were lower save for the cheap $600 quick and dirty paint jobs.
He's going to remove some trim, but not all, will take about 2 weeks to do the job. I saw some of his work and was reasonably impressed with it. It only has three very small dings in the body, and virtually no rust. Reason I wanted a new paint job was because the clearcoat had peeled off both front fenders (typical for 2000 Ford F150's). Does $2k sound about right to sand, prime, paint, and clearcoat with good paint?
Will post pic's after it's done, if there is interest.
He's going to remove some trim, but not all, will take about 2 weeks to do the job. I saw some of his work and was reasonably impressed with it. It only has three very small dings in the body, and virtually no rust. Reason I wanted a new paint job was because the clearcoat had peeled off both front fenders (typical for 2000 Ford F150's). Does $2k sound about right to sand, prime, paint, and clearcoat with good paint?
Will post pic's after it's done, if there is interest.