Costly Weekend!!!!!!!!!!!!!!!

   / Costly Weekend!!!!!!!!!!!!!!!
  • Thread Starter
#31  
I'm back up and running now. It was a long and painful process. I have flushed the system 4 times to include new tranny filter each time as well as cleaning the screen. A question I have is concerning a pinched steel Hydro line. When this all happened the line that runs from the bottom of the Hydro unit to the radiator coils got pinched a bit. I hear a bit of a whine from the general area where pinched. Tractor runs fine. Would this cause this noise or maybe air in the system??

Sarge
 
   / Costly Weekend!!!!!!!!!!!!!!! #32  
I would replace the pinched line. It sounds like the noise is being created by a venturi type of effect as the hydraulic fluid flow is being restricted there. This could cause excess pressure and insufficient cooling of the oil.
Ben
 
   / Costly Weekend!!!!!!!!!!!!!!! #33  
Not only that but the pinched line will add friction/heat as well. If its' pinched enough to make noise change it.
 
   / Costly Weekend!!!!!!!!!!!!!!!
  • Thread Starter
#34  
I did forget to mention that I took some channel locks and was able to pinch some of the kink out of the line and it did seem to sound a bit better. I have already ordered the new line and will be putting it in this weekend. Again I'll let everybody know.
 

Tractor & Equipment Auctions

2015 Chevrolet Silverado 1500 Pickup Truck 4X4 (A53473)
2015 Chevrolet...
UNUSED 20PCS Industrial Polyester Lifting Straps (A53117)
UNUSED 20PCS...
2019 FORD F-650 SUPER DUTY BOX TRUCK (A51406)
2019 FORD F-650...
2008 Ford Ambulance (A47477)
2008 Ford...
2009 Kaufman Gooseneck Trailer and 10K Hydro-Blast (A50860)
2009 Kaufman...
TOW BEHIND FINISH MOWER (A50324)
TOW BEHIND FINISH...
 
Top