Could you measure your B or L filter assembly for me?

[SPYDERLK]

I have that filter to convert my BX25 when it gets warmer. If it ever gets warmer!

Bottom of bulb to top of mounting flange - 4.420"
Bottom of bulb to highest point (OAL) - 4.435"

View attachment 416698

Do you have a P/N for this assembly. Thanks!

Not to high jack the thread, but I'll be interested to see where and how you mount it on your BX.

Me to.... Iv purchased a slightly larger inline NAPA Gold filter #3324 that looks small enuf to substitute in next change in the BX. Both D and L are a little more - maybe itll give ~ twice the filter area. I have hi hopes.
larry

 

[dsmiley]

Do you have a P/N for this assembly. Thanks!

See post #1.

 

[94BULLITT]

Was just going out to measure but see that it's done.

I was hoping you would see that they had measured it before you went to measure yours.

 

[George2615]

Fuel filters are being discussed in another thread also. Some are using the Wix, NAPA, or Fram G3 inlines as a pre filter.

Wix 33972 & Napa 3972 Fuel Filter: FleetFilter Secure Online Store - Wix, Fram, LuberFiner, Baldwin

Fram G3

 

[94BULLITT]

Was just going out to measure but see that it's done.

Fuel filters are being discussed in another thread also. Some are using the Wix, NAPA, or Fram G3 inlines as a pre filter.

Wix 33972 & Napa 3972 Fuel Filter: FleetFilter Secure Online Store - Wix, Fram, LuberFiner, Baldwin

Fram G3

The 3972 is the factory filter for the BX.

 

[smilinjak]

Roger,
I measured the filter assembly, height only. From the top of the higest point of the base to the bottom of the bowl is 4 11/16. Hope this is the information you sought.
Resondent # 79 I suppose
Smilinjak

 

[94BULLITT]

Roger,
I measured the filter assembly, height only. From the top of the higest point of the base to the bottom of the bowl is 4 11/16. Hope this is the information you sought.
Resondent # 79 I suppose
Smilinjak

Thanks, I need something under 5'' for where I plan on mounting it.

 

[David_Kb7uns]

The 3972 is the factory filter for the BX.

The 3927 IS NOT EQUIVALENT to the BX factory filter, the 3972/33972 is PLASTIC MESH with a 50 MICRON RATING where the Kubota BX filter is water blocking paper.

This is why I do not trust the WIX cross lists.

David Kb7uns