3-Point Hitch Cracked metal hydraulic line

[nightnurse]

I have a 15 year old Kubota B2400 HST, with a crack in the metal hydraulic line to the 3 point lift arms. Can this metal line be replaced with high-pressure rubber hose, and if so, what pressure rating should I use?

 

[crash325]

I have a 15 year old Kubota B2400 HST, with a crack in the metal hydraulic line to the 3 point lift arms. Can this metal line be replaced with high-pressure rubber hose, and if so, what pressure rating should I use?

Not sure about your Kubota, but most tractors run 2750 PSI or higher. Check with a local dealer, they may be able to replace or reccomend someone that can repair or make a new line. New line can be flexible and that is OK.