crank seal

[Fornshell]

Can anybody help me out with a part # on a JD 2240 Rear crank seal installer tool, Would really appreciate.

 

[5030]

Make one....

 

[Tx Jim]

According to my JD tech manual correct tool depends on part # of seal Tool # JD 272 or JD 297.

Rear Main Seal Installer Tool JT30040B fits J D 202 219 239 329 359 414 Engine | eBay

Tool doesn't appear to be very easy to reproduce unless one has access to a machine shop

 

[Fornshell]

My seal part # is DZ111672 . Thank you very much for the information.

 

[Tx Jim]

You're very welcome
Below is another tool that lists that part number.

Engine Crankshaft Rear Main Seal Installer for John Deere JDG478 JDG476 JDG477 | eBay

Tighten nut to draw JDG478 Driver in until crossbar bottoms on JDG477 (58) Pilot. When the tool bottoms, seal and wear ring assembly (B) will be correctly positioned. Oil seal/wear sleeve assembly MUST BE installed with the JDG476(85) Crankshaft Rear Oil Seal Installation Tool Set for correct...

www.ebay.com

 

[Fornshell]

I ordered one online that was for my part # , And the pilot part wouldn't bolt to the crank.

 

[Fornshell]

Called John Deere on that tool the part # they gave me is JDE -140 . Can't find anything with that number, does your book supercede a number.

 

[Bob1969]

what tool did you end up using? I am having the same problem finding the correct one to install a DZ111672 rear crankshaft seal.

 

[Fornshell]

I ordered mine from Tillman tools and it worked well.