Cub Cadet 2130 Reverse Mowing

   / Cub Cadet 2130 Reverse Mowing #1  

Cub124

Silver Member
Joined
Apr 1, 2010
Messages
124
Location
United States
Tractor
International Cub Cadet
We just got a 2130 and i wanted to know if anybody knew how to disable the safety switch that lets you mow while in reverse. I don't want to have to turn the pto on and off every time i back up. Any help would be appreciated.
 
   / Cub Cadet 2130 Reverse Mowing #2  
If you do a search on here I believe this issue has been addressed before.....from what I remember I believe you have to remove the mower deck, and there's a pin underneath that has to be kept pushed in....but check the other posts. Good luck!
 
   / Cub Cadet 2130 Reverse Mowing
  • Thread Starter
#3  
Thanks i have seen on here before how to do it. they said to disconnect the switch on the left side of the mower, but when i did that the pto would not turn on.
 
   / Cub Cadet 2130 Reverse Mowing #4  
Thanks i have seen on here before how to do it. they said to disconnect the switch on the left side of the mower, but when i did that the pto would not turn on.

It is probably a normally closed switch, so try connecting the the wires together where you disconnected them from the switch.

Aaron Z
 
   / Cub Cadet 2130 Reverse Mowing
  • Thread Starter
#5  
I got it. Thanks for all your help guys
 
   / Cub Cadet 2130 Reverse Mowing #6  
I just bought a used 2135 and desperately want to disable the reverse PTO kill function, can all of you that have performed it shed a little light on the matter. Does it involve bending something or jumping two wires? Details and locations are appreciated.
Thanks

EDIT - I just found the little gray switch (TOO much dead grass in the way) that was hidden pointind downward on the left side of the mower, I popped the dash grill out and disconnected the wiring, pushed the switch through, then re-connect the switch and let it sit under the battery area, this should allow me to mow in reverse!!!
 
Last edited:
   / Cub Cadet 2130 Reverse Mowing
  • Thread Starter
#7  
I never thought to just pop the switch out. I just bent the arm out of the way that pushes the switch.
 

Tractor & Equipment Auctions

2025 JMR Tree Boom Skid Steer Attachment (A46683)
2025 JMR Tree Boom...
2021 Toyota RAV4 SUV (A46684)
2021 Toyota RAV4...
2022 Lamtrac LTR6160T Track Mulcher (A49251)
2022 Lamtrac...
AGT Industrial SDA-140W (A43476)
AGT Industrial...
32x27 Rim (A46502)
32x27 Rim (A46502)
1992 Ford Supply Truck (A47307)
1992 Ford Supply...
 
Top