cub cadet 2146 PTO won't release

   / cub cadet 2146 PTO won't release #1  

cardonster

New member
Joined
Jun 9, 2005
Messages
1
cub cadet 2146 PTO won\'t release

pto clutch won't disengage even with wires unhooked - so, have to start unit with pto engaged. Any ideas???
 
   / cub cadet 2146 PTO won't release #2  
Re: cub cadet 2146 PTO won\'t release

</font><font color="blue" class="small">( pto clutch won't disengage even with wires unhooked - so, have to start unit with pto engaged. Any ideas??? )</font>

You must have a mechanical bind. First I would check the clearance between the clutch disc and hub at three places around the clutch. You should have at least .020 inch gap. There are springloaded adjusting screws which can be backed out to increase the gap. The other possibility is the disc has rusted or stuck on the spline and will have to be removed and cleaned up. Put a light coat of lubriplate on the spline.

Bob B.
 

Tractor & Equipment Auctions

1263 (A50490)
1263 (A50490)
2014 KENWORTH W900 MID-ROOF SLEEPER (A50854)
2014 KENWORTH W900...
2018 PETERBILT 579 SLEEPER (A51222)
2018 PETERBILT 579...
1987 FORD 2110 TRACTOR (A51222)
1987 FORD 2110...
2009 International Frazer Bilt X-514 Ambulance (A49461)
2009 International...
2018 GENIE GTH-5519 TELESCOPIC FORKLIFT (A51242)
2018 GENIE...
 
Top