Custom toolbox added behind the seat of my Boomer

Gary_in_Indiana · Oct 12, 2003

<font color="blue"> does anyone know where I can find an ADHESIVE slow moving vehicle sticker? </font>

Any SMV sign can be adhered to the side of your box with some good caulking or some expanding foam sealant like you'd use for filling in around openings for pipes into your building, etc. That stuff is an incredible adhesive. Just spray a VERY LITTLE on the toolbox, spread it around using the back of the sign so it's really thin then hold the sign there for a few minutes. It's going to be there forever.

varmint · Oct 14, 2003

If for some reason you don't find that adhesive SMV sign you want, just buy a plain one, and a roll of double-sided carpet tape... It won't come off. And, it is "thick" enough that small surface irregularities won't bother the final adhesion.

pekabu · Oct 14, 2003

www.agri-supply.com has them for 4.99. Check out this link:

AgriSupply SMV Decal

LAGEORGE · Oct 14, 2003

Is that the factory light and bracket you are using for the rear work light? If so what is the part number for the lamp and bracket. I have been wanting one but can’t get my dealer to find it in the book.

George

Bob_Skurka · Oct 14, 2003

LAGEORGE, yes it is the factory light and the factory bracket. The light is made by the SPEAKER company. I think the light and the bracket combined cost me $40, it took about 5 minutes to install by taping into the factory aux wire.

I don't know the part number, but I think you might find them in your manual for your TC24? I'll see if I can find it when I get home (I'm at the office) if I can, I'll post the part numbers for you.

LAGEORGE · Oct 14, 2003

When you get home from the office please look at your book at let me know. I have looked but it does not make sense. Help me to help myself /forums/images/graemlins/grin.gif

Thank you in advance,

George

RichNJKubota · Oct 14, 2003

Re: Custom toolbox added behind the seat of my Boo

Try using velcro with a regular SMV sign.

Bob_Skurka · Oct 15, 2003

LAGEORGE, the New Holland bracket is NH Part # SBA355761281 for the rear Aux. Light Bracket.

I do not have the part number for the light itself. However, it is a SPEAKER brand Model #900. The Speaker light was the light listed in the NH parts book as the correct light and all the numbers cross referenced and did not have any NH markings on the box. The light has a waterproof switch located on the top rear of the housing. When I went to my NH dealer, he had the light in stock in his parts department but did not have the bracket. The bracket took 2 weeks to arrive and IF my memory serves me cost $4.95.