Cutting edge for b21

gotcha · Dec 24, 2007

I believe if you check into the cutting edge it is just like the B26 and is double edged so when one side wears you can just remove and turn it over. That is one reason the cost is so high for installation as the holes have to be perfect so it will fit in both directions. The Gotcha Man

mopar3500 · Dec 26, 2007

Gotcha, I did try that and my dealer told me that the two buckets were different in size. I thought that they were the same but I might be wrong.

gotcha · Dec 27, 2007

mopar3500 said:
Gotcha, I did try that and my dealer told me that the two buckets were different in size. I thought that they were the same but I might be wrong.

mopar3500, I'm sorry as I may have confused you. I'm not sure of the size of the bucket for the 21. I do know the heavy duty bucket for the B26 is 60" and the medium duty (standard is 66"). What I was mainly referring to was the bolt on cutting edge. It is beveled on both sides so that it can be turned around when one side wears you can bolt on the other side. As said in another thread if you plan on installing a tooth bar you will have to remove the cutter bar as the mounting bolts get in the way of the pre-manufactured bars.
The Gotcha Man