Dealer Installing Rear Remotes

   / Dealer Installing Rear Remotes #1  

scsims

Silver Member
Joined
Jul 2, 2009
Messages
161
Location
Central, KY
Tractor
Mahindra 5525
Got a question, I'm having a loader and rear remotes installed on my Mahindra 5525.

The dealer picked of my tractor about noon Thursday and was hoping to get it back out to me today.

I just talked with them and they had some issues getting the rear remotes installed. They said that they had to find a fitting that would work and it took longer than expected.

That's totally fine with me, but I was wondering if they were installing the single spool kit from Mahindra why wouldn't it fit perfectly? If the instructions are followed that is. I have no idea what is involved in installing and plumbing all the stuff for a loader and remote so I though I'd ask.

Thanks,
Scott
 
   / Dealer Installing Rear Remotes #2  
but I was wondering if they were installing the single spool kit from Mahindra why wouldn't it fit perfectly?

Sounds like you need to ask them, not us:confused2:
 
   / Dealer Installing Rear Remotes
  • Thread Starter
#3  
Just wondering if was fairly normal to have to modify hoses or fitting that come in a kit?
 
   / Dealer Installing Rear Remotes #4  
If it were a factory kit made for your model tractor, I would it expect it to fit perfectly the first time. IMO, they probably had a job prior to yours take a little longer than expected, and are a little behind where they figured. "wrong fitting, gasket, muffler bearing" sounds like a generic excuse as to why they are a little behind. Personally, I wouldn't get concerned unless you get it back and something is not working properly. We all run a little behind sooner or later.
 
   / Dealer Installing Rear Remotes #5  
If it were a factory kit made for your model tractor, I would it expect it to fit perfectly the first time. IMO, they probably had a job prior to yours take a little longer than expected, and are a little behind where they figured. "wrong fitting, gasket, muffler bearing" sounds like a generic excuse as to why they are a little behind. Personally, I wouldn't get concerned unless you get it back and something is not working properly. We all run a little behind sooner or later.

I think most people understand this. It just seems ashame that some dealers feel they have to lie about it and make up an excuse. I think it works against them in the long run. Just MO.

gg
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2019 TAKEUCHI TL8 SKID STEER (A52709)
2019 TAKEUCHI TL8...
2013 International WorkStar 7400 Altec D3060ATR Insulated Digger Derrick Truck (A55973)
2013 International...
MURRAY PUSH MOWER (A58216)
MURRAY PUSH MOWER...
6' SCRAPE BLADE (A52708)
6' SCRAPE BLADE...
2007 International 4200 S/A Chipper Truck (A56858)
2007 International...
 
Top