Dearborn 10-156 2 bottom plow

   / Dearborn 10-156 2 bottom plow #1  

blucoondawg

Gold Member
Joined
Mar 17, 2012
Messages
430
Location
Pelican Lake, WI
Tractor
Kioti DK50SE w/ loader and Woods 90x backhoe, Allis Chalmers C with front snowplow
I'm considering a Dearborn 10-156 for my Kioti dk50se I'm not up on the old plows, this is a 14 inch plow, is there a downside to this plow are parts still available, are they reasonably priced?
 
   / Dearborn 10-156 2 bottom plow #2  
I don't have any experience with that plow concerning parts availability. If you are going to only use it for food plots and the plow is in decent shape you probably won't need to replace many parts. I bought a model 80 Allis Chalmers plow several years ago that was in good shape. For my limited use plowing a garden spot wear parts are not going to be an issue. I would look on eBay or Craigslist for parts and info concerning that plow
 
   / Dearborn 10-156 2 bottom plow
  • Thread Starter
#3  
I haven't found much info on them and I'm not well versed enough with plows to know what I'm reading anyways, I'm looking at that one as well as a Massey Ferguson 43 3 bottom can't really tell which one would be the better way to go, the 2 bottom looks plenty useable but the price is 50 bucks higher, the 3 bottom is 50 bucks less, one more bottom, a trip plow, but it's sitting in the weeds and don't know how good a shape it's in
 
   / Dearborn 10-156 2 bottom plow #4  
I'm not going to do a ton of plowing just some garden areas or food plots


The more bottoms a plow has the more difficult to adjust for good service. Plowing can take quite a while to learn as a skill. Unless you have a lot to plow, go with the two bottom, assuming the wear parts are serviceable.

A fourteen inch plow will create a furrow from 5" to 7" deep, laying over soil next to the furrow 5" to 7" high; total soil roughness 10" to 14". Is your top soil at least 7" deep? You do not want to mix top soil and sub-soil.

Plow wear parts are not generally available today but Dearborn and Massey-Ferguson plow parts are likely more available than others. 12" and 14" plow parts are out there, 16" very difficult to lay hands on.

Old trip plows generally have to be opened up, cleaned and lubricated before the trip mechanism will reset after tripping.

If you have Draft Control as well as Postion Control as part of your Three Point Hitch hydraulic system, the plow and tractor operator are reasonably well protected from underground obstructions. When adjusted properly, Draft Control will lift the plow automatically when it encounters an underground obstruction.

PICTURES: Ford Series 101 Trip Plow, 2-12", probably made by Oliver for Ford. Cleaned and lubricated once, has worked perfectly since, with annual greasing.
 

Attachments

  • DSC00270.jpg
    DSC00270.jpg
    866.3 KB · Views: 228
  • DSC00271.jpg
    DSC00271.jpg
    1,003.9 KB · Views: 241
  • DSC00272.jpg
    DSC00272.jpg
    1 MB · Views: 397
  • DSC00420.jpg
    DSC00420.jpg
    1 MB · Views: 639
  • IMG_0614.jpg
    IMG_0614.jpg
    152.5 KB · Views: 387
Last edited:
 

Tractor & Equipment Auctions

11' CONTAINER (A52706)
11' CONTAINER (A52706)
2015 Clarke Power Gen RC60D 47kW Towable Diesel Generator (A50324)
2015 Clarke Power...
2012 Freightliner M2 106 Asphalt Pothole Patcher Truck (A51692)
2012 Freightliner...
2018 CHEVROLET SILVERADO 2500HD (A53843)
2018 CHEVROLET...
2014 Walker Compactor (A55787)
2014 Walker...
2018 FORD F150 Ext Cab 4X4 Pick-up Truck (A53422)
2018 FORD F150 Ext...
 
Top