Debris screen

   / Debris screen #1  

MESSMAKER

Veteran Member
Joined
May 19, 2009
Messages
2,231
Location
Bluegrass,KY
Tractor
DK4710SE
How do you remove the screen in front of the radiator? It looks as if it should slide out for cleaning but on further inspection it appears as if you may have to remove the section above it to give it room to be pulled out through the top.
 
   / Debris screen #2  
It should be made for easy removal.

My Massey has a small tab at the top that I pull up to remove the debris.

It makes no sense to have one bolted on...you need to remove it very often if you are bush hogging or in any dirty/dusty environments.

While cutting, I can watch the temp gauge rise within an hour or two telling me to stop and clean out the screen.

Ivan.
 
   / Debris screen #3  
What tractor? On my CT230; lift hood, remove the lower panel on right side, take screw out of debris screen on right side, lift the loader, and slide it out from the side.
 
   / Debris screen
  • Thread Starter
#4  
I did not see the quick release tabs on the right side panel.I would not have thought you would have to remove a body panel. I got it now. Thanks
 

Tractor & Equipment Auctions

2006 Chevrolet Silverado 1500 4x4 Pickup Truck (A55788)
2006 Chevrolet...
2003 Chevy 2500 Pickup (RUNS) (TITLE) (A50775)
2003 Chevy 2500...
Galvanized Livestock Gate (A55301)
Galvanized...
2006 Patten Co Inflatable Boat and Trailer (A55758)
2006 Patten Co...
2013 Ford E-350 Cargo Van (A55788)
2013 Ford E-350...
UNUSED JCT 72" HYD VIBRATORY ROLLER (A54757)
UNUSED JCT 72" HYD...
 
Top