RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
After clearing out a path through some Bamboo, I was dismounting the loader for mowing the lawn. I noticed the gap between the hood and cowl was excessive.
The two tabs that hold the cowl sections to the firewall frame had both cracked. I'm not sure if this is repairable, but have any of you Deere 4x00 or 4x10 owners had this...and successfully repaired it?
The two tabs that hold the cowl sections to the firewall frame had both cracked. I'm not sure if this is repairable, but have any of you Deere 4x00 or 4x10 owners had this...and successfully repaired it?