tb1472000
Member
The subframe comes off the 2520 with the 46BH.
Backhoe Deere 46 backhoe
- Thread starter deere_x475guy
- Start date
- Views: 19633
OP
deere_x475guy
Gold Member
Great...another plus..thanks guys
Phil2005
New member
Yes, the subframe comes off with the backhoe.
trlong
Platinum Member
Two notes:
First, the only difficulty I have installing the 46 BH is removing the 3PH 1st, when I've been using 3PH implements. Installing the 46 is a breeze, on anything close to a level area, with a little practice.
Second, WATCH OUT for how FAST that boom moves, especially when fully extended dipper. Get it out away from anything and practice with it slowly. Bruises to siding, trees,... can happen really fast. Bruises to people and pets are much more serious.
Have fun. The 46 is a very capable tool.
Tom
First, the only difficulty I have installing the 46 BH is removing the 3PH 1st, when I've been using 3PH implements. Installing the 46 is a breeze, on anything close to a level area, with a little practice.
Second, WATCH OUT for how FAST that boom moves, especially when fully extended dipper. Get it out away from anything and practice with it slowly. Bruises to siding, trees,... can happen really fast. Bruises to people and pets are much more serious.
Have fun. The 46 is a very capable tool.
Tom
Cliff_Johns
Elite Member
Just as a reminder about ground clearance. Remember that although the subframe (when the BH is on) reduces the ground clearance, that reduction is in the form of two stout steel bars running fore and aft. If you hit bottom, it doesn't hurt the tractor any unless you've been droped from a ways up. Scraping over a rock isn't going to hurt the subframe any.
Cliff
Cliff
