Delrin, tivar,torlon or teflon sheets

   / Delrin, tivar,torlon or teflon sheets #1  

gws

Platinum Member
Joined
May 31, 2001
Messages
903
Tractor
yanmar ym1810
I am looking for a small "hunk" of insulative platic.
I need a block 6" x 18" x 1" could go a little smaller but not much.
Everyplace I have looked wants me to buy large sheets at VERY high prices.

Gary
 
   / Delrin, tivar,torlon or teflon sheets #2  
Gary....could you sandwich 3 or 4 pieces to get the desired thickness? I've got a sheet of quarter inch thick silicone rubber probably 12 inches square and it will sustain pretty high temperatures. It's yours if it will help.

/forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif

Jon
 
   / Delrin, tivar,torlon or teflon sheets #3  
Where are you located? There is a salvage "yard" in St Louis MO. It is actually indoors. It has odd lots of every kind of metal and plastics.
 
   / Delrin, tivar,torlon or teflon sheets #4  
McMaster-Carr will supply sheets down to 1sqft of most or all those materials you mentioned. For instance, if you can use HDPE, McMaster has 1"x24"x12" stock for about $32. They will also custom cut. http://www.mcmaster.com
 
   / Delrin, tivar,torlon or teflon sheets #5  
Think "cutting board", look on internet for .coms selling these precut or custom cut. All plastic should be insulative. The material available with properties close to Delrin would be nylon.

I have found 3/8" or 1/2" cutting boards in stores usefull for marine and other projects.
 

Tractor & Equipment Auctions

2020 John Deere 35G Mini Excavator (A49461)
2020 John Deere...
2017 Ford F550 4x4 Bucket Truck - 45FT Terex TL40 Boom, Powerstroke Diesel, Utility Bed, 54K Miles (A51039)
2017 Ford F550 4x4...
Komatsu PC138 (A50490)
Komatsu PC138 (A50490)
2018 Toro Grounds Master 7200 72in Zero Turn Commercial Mower (A50324)
2018 Toro Grounds...
Morooka MST 660VD Tracked Dump Truck (A51039)
Morooka MST 660VD...
2022 Ram Bighorn 2500 4X4 (A51039)
2022 Ram Bighorn...
 
Top