Dennis E. Colvin

   / Dennis E. Colvin #1  

brdnis

New member
Joined
Nov 13, 2013
Messages
1
Location
Forrest City, Arkansas
Tractor
1986 Ford 1510
I am looking for engine parts for a 1510 Ford tractor. I am needing 3 pistons, rings, inserts, Mains, and gasket kit. With a caliper the cylinders measure 3.16 inches and the old pistons measure 3.14. The block is put back to standard, (already done) and I am needing standard bearings.

If you could help me with this task, I would deeply appreciate it. I don't want to spend enough on engine parts to buy another tractor, and the parts can be aftermarket if you have them. I just want to put it back together as inexpensive as possible.

Thanks in advance for any and all the help you can give.

Dennis E. Colvin
 
   / Dennis E. Colvin #2  
I am looking for engine parts for a 1510 Ford tractor. I am needing 3 pistons, rings, inserts, Mains, and gasket kit. With a caliper the cylinders measure 3.16 inches and the old pistons measure 3.14. The block is put back to standard, (already done) and I am needing standard bearings.

If you could help me with this task, I would deeply appreciate it. I don't want to spend enough on engine parts to buy another tractor, and the parts can be aftermarket if you have them. I just want to put it back together as inexpensive as possible.

Thanks in advance for any and all the help you can give.

Dennis E. Colvin

Welcome to TBN Dennis. Your best bet is to repost this in the Ford forum so Sound Guy or some one see's it, Good Luck.
 

Tractor & Equipment Auctions

Kubota RTV 900 4x4 (Diesel) (A54865)
Kubota RTV 900 4x4...
JOHN DEERE 5125R LOT NUMBER 24 (A53084)
JOHN DEERE 5125R...
2020 Deere 325G (A50123)
2020 Deere 325G...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
BrushFox XHD72 72in Rotary Brush Cutter Skid Steer Attachment (A53421)
BrushFox XHD72...
BOMAG BW145D-40 SMOOTH DRUM ROLLER (A51246)
BOMAG BW145D-40...
 
Top