Dimensions for Quick-Attach equipment?

   / Dimensions for Quick-Attach equipment? #1  

Lizrad

New member
Joined
Dec 2, 2005
Messages
4
Location
Memphis, TN
Tractor
Ford 3000
Hi all, I'm a newbie, so please forgive me if I'm posting in the wrong place.
What I am looking for is the "Universal" measurements for skid steer attachments. I'm in the process of building a loader for my Ford 3000 tractor, and would like to be able to use skid steer attachments on it. Therefore, I want to build the device that goes on the loader arms that will work. I've looked high and low, and have not been able to find anything besides a few names of these types of systems:
Bob-Tach
Quik Tach
I have found that it is known as an SAE J2513 Standard.
Anyone out there with the dimensions or a link to a site with them?
Worst case I'll have to go find one somewhere and measure it..
Thank you in advance! /forums/images/graemlins/confused.gif
 
   / Dimensions for Quick-Attach equipment? #2  
Lizrad,
Wwelcome to TBN

I did a Yahoo search and came up with a fair number of links.

There were at least 3 vendors selling the docs you want I'd have posted a link but it was so long I think it would take a full page.

Try Yahoo, you'll get what you want.

Good luck
 
   / Dimensions for Quick-Attach equipment? #3  
Building your own loader!

Now that is a project I would like to follow...please post pics of your progress and results.
 
   / Dimensions for Quick-Attach equipment? #4  
</font><font color="blue" class="small">( What I am looking for is the "Universal" measurements for skid steer attachments... I've looked high and low, and have not been able to find anything besides a few names of these types of systems:
Bob-Tach
Quik Tach
I have found that it is known as an SAE J2513 Standard.
Anyone out there with the dimensions or a link to a site with them?
)</font>

Apparently it is a big undocumented secret as I found no
definitive specifications either when I had searched. So
I took the measurements from my tractor quick-tach and
accompanying loader bucket. You can find them in this
thread: Quick Attach Pallet Forks
 
   / Dimensions for Quick-Attach equipment? #5  
Would think that you could go by most any large tool rental yard that rents Bob-Cats and take all the measurement that you might need. If you post them here you'll be the first to share that information as I have not seen it posted here either.
 
   / Dimensions for Quick-Attach equipment? #7  
</font><font color="blue" class="small">( If you post them here you'll be the first to share that information as I have not seen it posted here either. )</font>

My earlier post probably wasn't clear. The
reverse-engineered SAE J2513 adapter
geometry can be found here: Quick Tach
 
   / Dimensions for Quick-Attach equipment? #8  
Good information there guys.....
 
   / Dimensions for Quick-Attach equipment? #9  
Would anybody know where I might find some specs on the dimension for the quick attach on the Bobcat mini track loaders - the MT52 and MT55? I have been tossing around the idea of making a quick attach for my BX loader and the attachments available for the MT series are about the right size to be compatible with the BX. I can't seem to dig up any info on the dimensions though....
 

Tractor & Equipment Auctions

2007 Pace American Enclosed Trailer (A49461)
2007 Pace American...
2006 Ford Crown Victoria Sedan (A50324)
2006 Ford Crown...
2002 International 9200i Truck (A51039)
2002 International...
EVERYTHING SOLD AS-IS WHERE IS!! (A50775)
EVERYTHING SOLD...
2022 Case TR340B Skidloader (RIDE AND DRIVE) (A50774)
2022 Case TR340B...
2008 CATERPILLAR 320D L (A50854)
2008 CATERPILLAR...
 
Top