Disengage HST

   / Disengage HST #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
Broke the drive belt to the main pump on Kubota T 1760 Kawasaki 2 cyl water cooled w/48" deck...375 hrs no repairs before. Problem was getting the mower to the trailer 100 yds away holding out the release rod and steering.\
Is there anyway to lock this out and not have to crab along bent over holding w/one hand and steering w/the other.It was rather daunting to a 240# 76 yr old trying to mow the back lot of the church.In hindsight I could have clamped it w/vise grips possibly but then who carries them off somewhere.
Any body been in this fix?
Allez
 
   / Disengage HST #2  
My Hydrostatic lawn tractor has a keyhole slot. You pull the lever out and through the round hold and slide it down to slot and it is held in place.
 
   / Disengage HST
  • Thread Starter
#3  
Thanks Spence. Apparently yours is more effective than my Kubota 1760.It has an angled rod however it doesn't hold well. Appreciate your tho'ts however.
Allez
 

Marketplace Items

(2) UNUSED 31" X 8 MM EXCAVATOR TRACKS W/ PINS (A60432)
(2) UNUSED 31" X 8...
Deere 350G LC (A53317)
Deere 350G LC (A53317)
2016 INTERNATIONAL PROSTAR TANDEM AXLE DAY CAB (A59904)
2016 INTERNATIONAL...
RAKE ATTACHMENT FOR MINI EXCAVATOR (A58214)
RAKE ATTACHMENT...
5004 (A55851)
5004 (A55851)
CATERPILLAR CS54B SMOOTH DRUM ROLLER (A60429)
CATERPILLAR CS54B...
 
Top