DIY 3pt hitch mount?

[Jay4200]

I'm looking for a set of plans for a generic class I 3pt hitch mount (don't know what the right buzzword is...) - either 'T' style or a triangle. I would also like to see related specs for pins and top link hole diameter, as well as ranges for width and height. If somebody could supply a link that has some or all of this stuff, I'd be forever grateful.

Thanks much.

 

[denmarktwp]

I would also like to see related specs for pins and top link hole diameter, as well as ranges for width and height. If somebody could supply a link that has some or all of this stuff, I'd be forever grateful.

Thanks much.

Here are some dimensions:

TractorData.com - Three-Point Hitch

 

[George2615]

Here's a few different types. If you have the steel and materials great. If not it may be more costly to build than buy ready made.

Category 1 3-Pt. Hitch to 2in. Receiver Adapter | 3-Point Hitch Adapters| Northern Tool + Equipment

3 Point Receiver Hitch | eBay

 

[bcp]

All the measurements should be here:



Bruce

 

[deanwerden]

I was going to have one burned out of 2 inch plate where I used to work so it had some weight to it.. I don't work there anymore so never mind

currently installing a piece of hitch tube in my rear blade so I can attach a reciever when I need to move a trailer

 

[Xfaxman]

You could copy this versatile design with two 2" receivers, from Omni Mfg.

OMNI Mfg LLC