DIY Loaded Tires

[steverichmond]

I'm interested in doing this to my bx2350 and I noticed the tubless valves are much different than the one pictured above. Will this tool work with tubless tire valves? If so, could someone please post a link or the part #?

Thanks,
Steve

 

[rcrcomputing]

Though I usually do not need weight in my tires, when I remove my backhoe, it might be nice. Any of you know the effects when my backhoe was on? TOO MUCH weight?

 

[soarkrebel1]

I'm interested in doing this to my bx2350 and I noticed the tubless valves are much different than the one pictured above. Will this tool work with tubless tire valves? If so, could someone please post a link or the part #?

Thanks,
Steve

Here you go............good company to buy from!
Liquid Ballast Supplies, Tires & Supplies - GEMPLER'S

 

[steverichmond]

Thanks so mch for the link! Will this work with BX 2350 tubless valves?

Thanks,
Steve

 

[soarkrebel1]

Thanks so mch for the link! Will this work with BX 2350 tubless valves?

Thanks,
Steve

I bought two of thier kits. One has adaptors for different valves.

A friend used them on his smaller John Deere and worked fine.

If your are going to add anti freeze I would recommend using a 12 sprayer .....like you would use on the back of your atv. I was able to get all my anti freeze in the tire before hooking up the water.

It really is simple....

 

[Barneyhunts]

I was in a Tractor Supply store today and they had the fitting with two additional adapters -should fit three sizes of valve stems.